Abstract:Abstract lithium ion conducting polymer electrolyte is one of the essential components of modern rechargeable lithium batteries because of its good interfacial contact with electrodes and effective mechanical properties. A solid lithium ion conducting polymer blend electrolyte is prepared using poly (vinyl acetate) (PVAc) and poly (methyl methacrylate) (PMMA) polymers with different molecular weight percentages (wt%) of lithium chloride (LiCl) by the solution casting technique with tetrahydrofuran as a solvent. The polymer electrolytes were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), Thermogravimetry (TG), AC impedance spectroscopy and ionic transport measurements. XRD and FTIR studies confirm the amorphous nature of the polymer electrolyte and the complexation of salt with polymer. The thermal behavior of polymer electrolytes has been studied from DSC and TG. The highest conductivity obtained using AC impedance spectroscopy is 1.03×10 −5 Scm −1 at 303 K for 70 wt%PVAc:30 wt%PMMA:0.8 wt% of LiCl polymer-salt complex. The plasticizer ethylene carbonate (EC) and nanofiller titania (TiO 2 ) were added to the optimized high conducting blend polymer electrolyte. An enhancement in conductivity by one order of magnitude was observed for the plasticized 70 wt%PVAc-30 wt%PMMA-0.8 wt% LiCl polymer electrolyte at ambient temperature. The ionic conductivity value obtained using AC impedance spectroscopy for the plasticized 70 wt%PVAc-30 wt%PMMA-0.8 wt% LiCl polymer electrolyte was 1.03×10 −4 Scm −1 . The highest conductivity obtained for 70 wt%PVAc-30 wt%PMMA-0.8% LiCl-6 mg TiO 2 was 4.45×10 −4 Scm −1 . Dielectric properties of polymer films are studied and discussed. The electrochemical stability of 1.69 V and 2.69 V was obtained for 70 wt%PVAc-30 wt%PMMA-0.8% LiCl and 70 wt%PVAc-30 wt%PMMA-0.8% LiCl-6 mg TiO 2 polymer electrolytes, respectively, using linear sweep voltammetry. The value of Li + ion transference number was estimated by the DC polarization method and was found to be 0.99 for the highest conducting 70 wt%PVAc-30 wt%PMMA-0.8 wt% LiCl-6 mg TiO 2 nanocomposite polymer electrolyte.

Preparation and characterization of lithium ion conducting polymer electrolytes based on a blend of poly(vinylidene fluoride-co-hexafluoropropylene) and poly(methyl methacrylate)

Preparation and Characterization of PVDF-HFP/MG49 Based Polymer Blend Electrolyte

Effects of PDMS with Polyether Side Chains on the Fluoropolymer Based Gel Lithium Electrolytes

Electrical Properties of Lithium-Ion Conducting Poly (Vinylidene Fluoride-Co-Hexafluoropropylene) (PVDF-HFP)/Polyvinylpyrrolidone (PVP) Solid Polymer Electrolyte

Study of PVAc-PMMA-LiCl polymer blend electrolyte and the effect of plasticizer ethylene carbonate and nanofiller titania on PVAc-PMMA-LiCl polymer blend electrolyte

Effect of lithium hexafluorophosphate LiPF6 and 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide [Bmim][TFSI] immobilized in poly(2-hydroxyethyl methacrylate) PHEMA

A novel polymer electrolyte based on PMAML/PVDF-HFP blend

A Preeminent Gel Blending Polymer Electrolyte of Poly(vinylidene Fluoride-Hexafluoropropylene) -Poly(propylene Carbonate) for Solid-State Lithium Ion Batteries

Complementary Hybrid Design of Solvated Electrolyte Membranes Enabled by Porous Carbon Reinforcement for High-Performance Lithium Batteries

Studies on electrical conductivity and dielectric behaviour of PVdF–HFP–PMMA–NaI polymer blend electrolyte

Structure and electrochemical properties of composite polymer electrolyte based on poly vinylidene fluoride-hexafluoropropylene/titania-poly(methyl methacrylate) for lithium-ion batteries

Preparation and proton conductivity of poly(vinylidene fluoride)/layered double hydroxide nanocomposite gel electrolytes

Ionic transport studies in PVDF-HFP-PMMA-(PC+DEC)-LiClO4 gel polymer electrolyte

FTIR studies of PEMA/PVdF-HFP blend polymer electrolyte system incorporated with LiCF3SO3 salt

Preparation and characterization of proton conducting polymer blend electrolytes (PVC/PMMA/NH4SCN)

Investigation on PVDF-HFP microporous membranes prepared by TIPS process and their application as polymer electrolytes for lithium ion batteries

Structural, thermal and ion transport properties of radiation grafted lithium conductive polymer electrolytes

An investigation on PAN–PVC–LiTFSI based polymer electrolytes system

Structural, morphological, electrical and electrochemical study on plasticized PVdF-HFP/PEMA blended polymer electrolyte for lithium polymer battery application