Abstract:Solid polymer electrolytes (SPEs) attract great attention due to their wide electrochemical stability window, low cost, and excellent processability. However, some obstacles, including their low ionic conductivity, poor solid–solid contact between the SPE and lithium metal electrode, and uneven lithium deposition behavior, hinder their application in solid-state lithium batteries. Herein, a flexible composite solid electrolyte is facilely designed and successfully fabricated by introducing reactive petal-like MoS2 nanosheets to a poly(vinylidene fluoride-co-hexa-fluoropropylene) (PVDF-HFP)/lithium bis(fluorosulfonyl)imide (LiFSI) polymer electrolyte. The addition of petal-like MoS2 nanosheets not only greatly improves the room-temperature ionic conductivity to 2.8 × 10–4 S cm–1 but also decreases interfacial impedance and in situ suppresses lithium dendrite growth. In the resulting solid-state batteries, both rate capacity (137 mAh g–1 at 0.54C) and cycling stability (Coulombic efficiency in each cycle close to 100% during 200 cycles) are obtained by employing the electrolyte. In addition, the rational mechanism of MoS2 in improving ion conduction and suppressing lithium dendrite growth is suggested.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c08008?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c08008</a>.Experimental section, synthesis routine of the MPE, EDS of MoS2, Arrhenius plots of ionic conductivities of PVDF-HFP/LiFSI and PVDF-HFP/LiTFSI, LSV plots of electrolytes with different MoS2 contents, FT-IR spectra of PVDF-HFP/LiFSI and MPE-10, AC impedance of the Li|PVDF-HFP/LiFSI|Li cell and Li|MPE-10|Li cell, and SEM and XPS of the Li surface (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c08008/suppl_file/sc0c08008_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Manufacture of Solid Polymer Electrolyte (SPE) Based on PVDF HFP-LiBOB

Structure, thermal and electrical properties of PVDF-HFP/LiBOB solid polymer electrolyte

The Effect of LiBOB Addition on Solid Polymer Electrolyte (SPE) Production based PVDF-HFP/TiO2/LiTFSI on Ionic Conductivity for Lithium-Ion Battery Applications

Effect of Amphiphilic Hyperbranched-Star Polymer on the Structure and Properties of Pvdf Based Porous Polymer Electrolytes

Preparation Of Pvdf/P(Mma-Co-Pegma) Porous Membranes Via Phase Inversion Process For Gel Polymer Electrolyte

PEO/PVA/LiOH Solid Polymer Electrolyte Prepared via Ultrasound-assisted Solution Cast Method

Effects of 1-hexyl-1-methylimidazolium iodide ionic liquid to poly(vinyl alcohol)–based solid polymer electrolyte

Formability of low-molecular weight polyethylene oxide reinforced by tempo-oxidized nanocellulose for lithium-ion battery solid polymer electrolyte

Boosting the performance of poly(ethylene oxide)‐based solid polymer electrolytes by blending with poly(vinylidene fluoride‐co‐hexafluoropropylene) for solid‐state lithium‐ion batteries

Solid Electrolyte Based on Waterborne Polyurethane and Poly(ethylene Oxide) Blend Polymer for All-Solid-state Lithium Ion Batteries

Using Pegylated Graphene Oxide to Achieve High Performance Solid Polymer Electrolyte Based on Poly(ethylene oxide)/Polyvinyl Alcohol Blend (PEO/PVA)

Flexible Composite Solid Electrolyte with an Active Inorganic Filler

In Situ Generation of a Gel Polymer Electrolyte via the Controlled Formation of Ethylene Carbonate in a Poly(ethylene carbonate)‐Hydrogenated Nitrile Butadiene Rubber Solid Polymer Electrolyte

In Situ Polymerization Of Methoxy Polyethylene Glycol (350) Monoacrylate And Polyethyleneglycol (200) Dimethacrylate Based Solid-State Polymer Electrolyte For Li-Ion Batteries

A fiber-reinforced solid polymer electrolyte by in situ polymerization for stable lithium metal batteries

Study of solid polyurethane electrolytes synthesized from HDI and PEO of different molecular weight

Tailored PEO/PEG-PPG Polymer Electrolyte for Solid-State Lithium-Ion Battery

Performance Enhancement of PEO: LiDFOB Based Nanocomposite Solid Polymer Electrolytes via Incorporation of POSS-PEG 13.3 Hybrid Nanoparticles for Solid-State Li-ion Batteries

A High-Performance Self-Reinforced PEO-Based Blend Solid Electrolyte Membrane for Solid-State Lithium Ion Batteries

Advanced High-Voltage Electrolyte Design Using Poly(ethylene oxide) and High-Concentration Ionic Liquids for All-Solid-State Lithium Metal Batteries

Optimized nano-perovskite lanthanum cuprate decorated PVA based solid polymer electrolyte