Abstract:All-solid-state lithium-ion batteries are becoming more and more important due to their extremely high security and reliability. However, the electrochemical performance is unsatisfactory for the widely investigated solid polymer electrolytes (SPEs) based on polyethylene oxide (PEO) due to its high crystallinity. In order to solve the above shortcoming, the solid blend polymer electrolyte of PEO and polyvinylidene fluoride (PVDF) containing ZnO nanofiller with outstanding electrochemical performance was successfully prepared by an ameliorated method. The influences of ZnO nanofiller content on crystallinity, mechanical properties and electrochemical performance with respect to ion conductivity, lithium-ion migration number, cycle stability and rating capability of SPEs were systematically investigated. The results showed that the crystallinity of SPEs presented the first downward, and then upward tendency with the increase in content of ZnO nanofiller, resulting in the lowest crystallinity obtained in the SPE with 2 wt% ZnO (5.05%). The SPE with 2 wt% ZnO also demonstrated the optimal mechanical properties with the highest tensile/breaking strength (2.349/1.401 MPa) and elongation after breaking (241.911%). The similar tendency was also observed in electrochemical performance. The highest ion conductivity (3.145 × 10−4 S cm−1 at 60 °C) and lithium-ion migration number (0.768 at 60 °C) were obtained on the SPE with 2 wt% ZnO. In addition, the coin cell containing the SPE with 2 wt% ZnO presented an excellent cycle stability (more than 1000 h) and rating capability (a high retention rate of 63.02% in discharge specific capacity with the current density increased from 0.1 C, 0.2 C, 0.5 C, 1 C, 2–3 C in turn, finally reduced to 1 C) at 60 °C, which were far higher than those of the SPE without ZnO. The research indicated that introducing the suitable content of ZnO nanofiller contributed to the improvement in electrochemical performance. On the contrary, the over addition of ZnO caused the reduction in electrochemical performance due to the agglomeration of ZnO nanofiller.

Evolution in electrochemical performance of the solid blend polymer electrolyte (PEO/PVDF) with the content of ZnO nanofiller

A Novel Phosphorus-Containing Pyridinium Porous Organic Framework with Flame Retardancy for Enhancing Efficiency and Safety of Solid-State Polymer Electrolyte

A Strategy for Preparing Solid Polymer Electrolytes Containing In Situ Synthesized ZnO Nanoparticles with Excellent Electrochemical Performance

Composite polymer electrolytes with uniform distribution of ionic liquid-grafted ZIF-90 nanofillers for high-performance solid-state Li batteries

Boosting the performance of poly(ethylene oxide)‐based solid polymer electrolytes by blending with poly(vinylidene fluoride‐co‐hexafluoropropylene) for solid‐state lithium‐ion batteries

ZnO Quantum Dots as PEO‐Based Solid Electrolytes Fillers for Lithium Metal Batteries

Vapor phase infiltration of ZnO quantum dots for all-solid-state PEO-based lithium batteries

Effect of ZnO Nanofiller on Structural and Electrochemical Performance Improvement of Solid Polymer Electrolytes Based on Polyvinyl Alcohol-Cellulose Acetate-Potassium Carbonate Composites

Performance Enhancement of PEO: LiDFOB Based Nanocomposite Solid Polymer Electrolytes via Incorporation of POSS-PEG 13.3 Hybrid Nanoparticles for Solid-State Li-ion Batteries

High-performance Solid Polymer Electrolytes for Lithium Ion Batteries Based on Sulfobetaine Zwitterion and Poly (ethylene Oxide) Modified Polysiloxane

Stable Polymer Electrolytes Based on Polyether-Grafted Zno Nanoparticles for All-Solid-State Lithium Batteries

g-C3N4 nanosheets enhanced solid polymer electrolytes with excellent electrochemical performance, mechanical properties, and thermal stability

Two-dimensional silica enhanced solid polymer electrolyte for lithium metal batteries

In-Situ Plasticized LLZTO-PVDF Composite Electrolytes for High-Performance Solid-State Lithium Metal Batteries

Intimate interaction of TFSI− anions with MoO3−x oxygen vacancies boost ionic conductivity of cathode-supported solid polymer electrolyte

Enhanced Lithium-Ion Transport in Lithium Metal Batteries Using ZSM-5 Nanosheets Hybridized Solid Polymer Electrolytes

Metal Organic Frameworks Enabled Multifunctional Poly(ethylene oxide)-Based Solid Polymer Electrolytes with High Lithium-Ion Conductivity and Excellent Stability

Garnet/polymer solid electrolytes for high-performance solid-state lithium metal batteries: The role of amorphous Li2O2

Hollow multishelled structural ZnO fillers enhance the ionic conductivity of polymer electrolyte for lithium batteries

Enhancing Li-ion conduction and mechanical properties via addition of fluorine-containing metal—organic frameworks in all-solid-state cross-linked hyperbranched polymer electrolytes

Oxygen Vacancy-Rich Ultrathin Co3O4 Nanosheets as Nanofillers in Solid-Polymer Electrolyte for High-Performance Lithium Metal Batteries