Abstract:Fatigue damage is generally described as the nucleation and growth of cracks to final failure. These two stages of fatigue damage are often modeled with completely different methods with no quantitative relationships between them. In addition, a number of fitting parameters are needed in order to consider different effects. The current work is aimed to develop a robust approach for the prediction of fatigue life from crack initiation to final fracture. The approach bridges the gap between the crack nucleation and growth regions. Based upon the conception that fatigue damage is directly related to the stresses and strains inside the material, it is assumed that both crack nucleation and crack growth are governed by the same fatigue damage mechanisms and a single fatigue damage criterion can model both stages. A basic rule is that any material point fails to form a fresh crack if the total accumulated fatigue damage reaches a limit. Crack growth is treated as a process of continuous crack nucleation without using the stress intensity factor or J-integral concept. The approach consists of two steps: stress analysis and fatigue damage prediction. Elastic-plastic stress analysis is conducted for the component to obtain the detailed stress-strain responses. By using a general fatigue criterion, fatigue crack nucleation and growth are predicted. Notched specimens made of 1070 steel were experimentally tested from crack initiation till fracture. The approach was applied to predict the fatigue life of 1070 steel and the predicted fatigue lives were in excellent agreement with the experimental observations.

Fatigue Life Evaluation Considering Fatigue Reliability and Fatigue Crack for FV520B-I in VHCF Regime Based on Fracture Mechanics

Viscoelastic Fracture Mechanics-Based Fatigue Life Model in Asphalt-Filler Composite System

A New Empirical Life Prediction Model For 9-12%Cr Steels Under Low Cycle Fatigue And Creep Fatigue Interaction Loadings

Very High Cycle Fatigue Failure Analysis and Life Prediction of Cr-Ni-W Gear Steel Based on Crack Initiation and Growth Behaviors

A general energy-based model for fatigue life prediction of high-temperature structural materials

Assessment of prior fatigue damage and a new approach to predict remanent creep rupture of P92 steel

Prediction of long-term fatigue life of CFRP composite hydrogen storage vessel based on micromechanics of failure

A Robust Life Prediction Model for a Range of Materials under Creep-Fatigue Interaction Loading Conditions

A Novel Viscosity-Based Model for Low Cycle Fatigue–Creep Life Prediction of High-Temperature Structures

Fatigue Life and Mechanistic Modeling of Interior Micro-Defect Induced Cracking in High Cycle and Very High Cycle Regimes

Evaluation of Fatigue Life Prediction Models and Investigation of Fracture Mechanisms of Mild Steel

An Approach for Fatigue Life Prediction

A Novel Energy-Critical Multiaxial Fatigue Life Prediction for Low Cycle Fatigue under Mixed-Mode Loading

A New Life Prediction Model Based on Ductility Exhaustion Theory for High Temperature Low Cycle Fatigue of Turbine Disk Alloys

An engineering model of fatigue crack growth under variable amplitude loading

Fatigue life modeling for a low alloy steel after long-term thermal aging

Fatigue Life Prediction of Cracked Stiffened Plate Using the Improved Fatigue Crack Growth Rate Model

A Modified Highly Stressed Volume (HSV) Method to Predict Fatigue Life Considering the Critical Crack Size

Fatigue crack initiation site transition of high‐strength steel under very high‐cycle fatigue

Application of a Cohesive Zone Model for Simulating Fatigue Crack Growth from Moderate to High <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" id="M1"><mml:mi mathvariant="normal">Δ</mml:mi><mml:mi>K</mml:mi></mml:math> Levels of Inconel 718

A fatigue life prediction approach to interior cracking induced high cycle and very high cycle fatigue for surface‐carburized steels