Abstract:Abstract Hydrogen storage cylinders are often used for medium- and short-distance transportation of hydrogen. The presence of hydrogen tends to increase the risk of using the gas cylinders. The alternating stress caused by factors such as hydrogen charging and discharging during the service process of the gas cylinder leads to the expansion of initial cracks inside the cylinder and the final fatigue fracture. At present, the fatigue life calculation of pressure vessels mainly adopts the S-N curve method, however, some steels do not have the S-N curve under the hydrogen environment, it is necessary to use fracture mechanics methods to analyze the fatigue life of gas cylinders in a high-pressure gaseous hydrogen environment. In this work, a method for calculating the fatigue life of fracture mechanics for hydrogen storage cylinders was established according to ASME VIII-3 KD-10. The development of the program was completed by Matlab. An example was given to illustrate the program. Firstly, basic parameters of the material used for the cylinder were obtained. Then, finite element method was used for stress analysis to obtain the fitting curve and the function expression of hoop stress. Finally, fatigue life calculations of high pressure hydrogen storage cylinder were made. The minimum service life of example was predicted to be 40 years. This result is consistent with the good service history of this type of container. This work could contribute to design, safety evaluation of hydrogen storage cylinders.

Fatigue Life Evaluation of High Pressure Hydrogen Storage Vessel

Fatigue Test of Carbon Epoxy Composite High Pressure Hydrogen Storage Vessel under Hydrogen Environment

Mechanical Analysis of Carbon Fiber Filament Wound Hydrogen Storage Vessel with Aluminum Alloy Liner

Research on Hydrogen Environment Fatigue Test System and Correlative Fatigue Test of Hydrogen Storage Vessel

Design Fatigue Life Evaluation of High-Pressure Hydrogen Storage Vessels Based on Fracture Mechanics

Effects of Crack Position on Fatigue Life of Large Seamless Storage Vessels Made of 4130X for Hydrogen Refueling Station

Mechanical Analysis and Optimal Design for Carbon Fiber Resin Composite Wound Hydrogen Storage Vessel With Aluminum Alloy Liner

Research on the Influence of the Liner Crack Size and Location on Fatigue Life of 70mpa Type III Cylinder

Numerical Simulation on Hydrogen Induced Cracking Behavior of 4130X Hydrogen Storage Vessel with Defect

Effect of inside diameter on design fatigue life of stationary hydrogen storage vessel based on fracture mechanics

Prediction of long-term fatigue life of CFRP composite hydrogen storage vessel based on micromechanics of failure

Experimental Analysis on Residual Performance of Used 70 MPa Type IV Composite Pressure Vessels

Micromechanics-based Burst Failure Analysis of Composite Vessel Used for Hydrogen Storage

Micromechanics-based Progressive Failure Analysis of Carbon FIber/epoxy Composite Vessel under Combined Internal Pressure and Thermomechanical Loading

Instability Analysis and Development of High Pressure Hydrogen Storage Vessels

Fatigue Life Calculation Method of 4130X High Pressure Hydrogen Storage Cylinder With Initial Crack Defect

Hydrogen-enhanced Fatigue Life Analysis of Cr–Mo Steel High-Pressure Vessels

Mechanical Analysis and Optimal Control of Hydrogen Storage Vessels with Carbon Fiber Filament Wound Aluminum Liner

Crack Propagation Characteristics and Fatigue Life of the Large Austenitic Stainless Steel Hydrogen Storage Pressure Vessel

Fatigue analysis of high-pressure hydrogen storage vessel based on optimum autofrettage pressure

Hydrogen assisted fatigue life of Cr-Mo steel pressure vessel with coplanar cracks based on fatigue crack growth analysis