Abstract:This paper focuses on the study of ductility changes, ratcheting, and low-cycle fatigue behavior of materials after hydrogen charging. Hot-rolled ribbed bar 400 (HRB400) steel was electrochemically charged with H2SO4 solution, and the samples subjected to different hydrogen charging times were subjected to quasi-static tensile and low-cycle fatigue tests under asymmetric cyclic loading. The tests indicated that hydrogen charging changed the initial yield stress of the material, but the ultimate strength remained almost unchanged; hydrogen charging significantly changed the cyclic hysteresis behavior of the material, which increased the elastic range of the stable hysteresis curve; hydrogen charging changed the pattern of ratcheting deformation. The pattern of ratcheting deformation in the later stage was very different from that of the sample without hydrogen charging; hydrogen charging reduced the ductility of the material and resulted in a significant decrease in fatigue life. The fracturing of the hydrogen-charged samples exhibited apparent quasi-cleavage and intergranular fracture characteristics. The non-hydrogen-charged samples had two failure modes (fatigue failure and increased ratcheting deformation resulting in necking instability), whereas the hydrogen-charged samples had only one failure mode of fatigue failure. Based on the experimental analysis, a fatigue life equation that simultaneously considers the effect of hydrogen embrittlement index, mean stress, and stress amplitude is proposed. The equation was used to predict the low-cycle fatigue life of hydrogen-charged specimens under asymmetric cyclic loading, and the error between the results and the measured values was in the two-factor band.

Fatigue Test of Carbon Epoxy Composite High Pressure Hydrogen Storage Vessel under Hydrogen Environment

Research on Hydrogen Environment Fatigue Test System and Correlative Fatigue Test of Hydrogen Storage Vessel

Hydrogen Environment Fatigue Test System Development of High Pressure Hydrogen Storage Vessels

Temperature Effects of Composite High Pressure Hydrogen Storage Cylinders in the Rapid Hydrogen Charging and Discharging Process

Structure design of mobile carbon fibre composite material high pressure hydrogen storage vessel

Mechanical Analysis of Carbon Fiber Filament Wound Hydrogen Storage Vessel with Aluminum Alloy Liner

Effects of Crack Position on Fatigue Life of Large Seamless Storage Vessels Made of 4130X for Hydrogen Refueling Station

Experimental Analysis on Residual Performance of Used 70 MPa Type IV Composite Pressure Vessels

Design Fatigue Life Evaluation of High-Pressure Hydrogen Storage Vessels Based on Fracture Mechanics

Instability Analysis and Development of High Pressure Hydrogen Storage Vessels

Study on Burst Pressure of Type Ⅳ Hydrogen Storage Cylinder Based on Progressive Failure Analysis

Thermo-mechanical Investigation of Composite High-Pressure Hydrogen Storage Cylinder During Fast Filling

Prediction of long-term fatigue life of CFRP composite hydrogen storage vessel based on micromechanics of failure

Micromechanics-based Burst Failure Analysis of Composite Vessel Used for Hydrogen Storage

Effect of hydrogen on low-cycle fatigue behavior of HRB400 steel under asymmetric cyclic loading

Study on Parametric Modeling and Finite Element Analysis for Composite Hydrogen Storage Vessel

Numerical Analysis of Temperature Rise Within 70 MPa Composite Hydrogen Vehicle Cylinder During Fast Refueling

Fatigue Life Evaluation of High Pressure Hydrogen Storage Vessel

Hydrogen-enhanced Fatigue Life Analysis of Cr–Mo Steel High-Pressure Vessels

The Fatigue Threshold Computation Of Steel In Hydrogen Environment By Shakedown Analysis

Effect of inside diameter on design fatigue life of stationary hydrogen storage vessel based on fracture mechanics