Abstract:The main goal of this paper is the modeling, numerical simulation, and experimental validation of the anisotropic ductile damage effects on initially anisotropic plastic flow with mixed (isotropic and kinematic) nonlinear hardening under large plastic strains for metal forming processes simulation. A symmetric second-rank damage tensor together with a symmetrized fourth-rank damage-effect tensor is used to describe the anisotropic ductile damage evolution and its effect on the large plastic flow with hardening. Following the concept of effective state variables in the framework of the total energy equivalence assumption, the “Murakami” fourth-rank damage-effect tensor is chosen to describe the anisotropic damage effect on the elastic-plastic behavior including the mixed hardening. The “Lemaitre” ductile anisotropic damage evolution relationships, where the principal directions of the damage rate tensor are governed by those of the plastic strain rate tensor, are used. As difference with the works cited above, the nonlinear mixed isotropic and kinematic hardening is taken into account considering the full and strong damage effects through the effective state variables deduced from the total energy equivalence assumption initially proposed by Saanouni et al. The non-associative plasticity theory is considered, and the “ Hill 1948 ” quadratic (equivalent) stress norm is used to describe the large plastic anisotropic flow accounting for mixed isotropic and kinematic hardening with anisotropic damage effects. The formulation is performed assuming finite plastic strains and small elastic strains through the so-called rotated frame formulation. The obtained model was implemented into ABAQUS/Explicit® FE software thanks to the user’s developed subroutine VUMAT. The numerical aspects related to the time discretization of the fully coupled anisotropic constitutive equations are carefully described. Finally and for the validation purpose, the model is identified using an appropriate experimental data base concerning the grade 316L stainless steel to simulate numerically some metal forming processes.

Application of anisotropic continuum damage mechanics in ratcheting characterization

Continuum Damage Mechanics Based Fatigue Life Prediction and Fatigue Property Analysis of Pitting Corrosion Steel Bars

The Whole-Life Ratcheting Behavior of Internal Pressurized Elbow Subjected to Force and Displacement Cycling with a Damage-Coupled Kinematic Hardening Model

Analysis of Cord-Rubber Composite Response Using the Nonlinear Continuum Damage Mechanics Approach

A visco-plastic constitutive model for ratcheting of cyclically stable materials and its finite element implementation

Modeling ductile damage under fully reversed cycling

Constitutive Modelling of Ratcheting Behaviour for Nickel-Based Single Crystal Superalloy under Thermomechanical Fatigue Loading Considering Microstructure Evolution

Incremental Growth Analysis of a Cantilever Beam under Cyclic Thermal and Axial Loads

Uniaxial ratcheting and fatigue failure of tempered 42CrMo steel: Damage evolution and damage-coupled visco-plastic constitutive model

A Thermodynamically Consistent Anisotropic Continuum Damage Mechanics Model With Damage-Dependent Equivalent Strain

Characterization and modeling of the ratcheting behavior of unidirectional off-axis composites

Anisotropic ductile damage fully coupled with anisotropic plastic flow: Modeling, experimental validation, and application to metal forming simulation

Damage Analysis for an Elastic-Plastic Body in Cylindrical Contact with a Rigid Plane

Study on Endochronic Theory of Non-Proportional Cyclic Plasticity

Viscoplastic Constitutive Modelling of the Ratchetting Behavior of 35crmo Steel under Cyclic Uniaxial Tensile Loading with a Wide Range of Stress Amplitude

Uniaxial and non-proportionally multiaxial ratcheting of SS304 stainless steel at room temperature: experiments and simulations

A constitutive model for the mechanical behavior of a 3D C/C composite

A Metallic Constitutive Model Considering Damage Evolution and Bilinear Mixed Hardening

Ductile rupture under cyclic loadings at high triaxiality: The influence of strain hardening and elasticity

Enhanced CDM model accounting of stress triaxiality and Lode angle for ductile damage prediction in metal forming

Prediction of Low Cycle Fatigue Crack Growth under Mixed-mode Loading Conditions Using Cohesive Zone Models