Abstract:In this work, anti-resonant hollow core fiber is studied in detail for its macro-bending loss properties. The mode is confined inside the central air core of hollow core fiber using inhibited coupling between core and cladding modes by anti-resonance mechanism. The simulated bending loss profile shows the resonance peaks at certain bending radii due to coupling between core and cladding modes for the chosen ratio of cladding and core diameters. In order to reduce the bending loss, the fiber design parameters such as gap between the silica cladding tubes and silica tube thickness are further optimized within the range corresponding to lowest confinement loss in visible wavelength range. For the optimized gap and thickness, the resonance peaks are shifted towards smaller bending radii by 20 cm and 18 cm when fiber is bent around X- and Y- axis respectively. The bending loss is calculated as < 0.1 dB/turn with the optimized bending radius < 50 cm for both the x- and y- polarized fundamental modes around both the bend axes. Bending loss profile is optimized by studying the simultaneous dependence of fiber design parameters (gap between silica tubes and silica tube thickness) and bending conditions (bend radius and bend axis) of degenerate fundamental mode of a hollow core fiber.

Dependence of macro-bending loss on bending configuration of multimode optical fibers studied by ray-tracing simulation

Modeling bending losses of optical nanofibers or nanowires.

Theoretical and Experimental Study of Macrobending Loss of the Single-Mode Fiber

Roughness-induced Radiation Losses in Optical Micro or Nanofibers.

Bending effects on lasing action of semiconductor nanowires.

Modeling and Simulation of Macrobending Losses in Metal-Coated Single-Mode Fibers

Loss Analysis of Arbitrary-Bending Mono-Mode Fiber

Improved evaluation model for macro-bending loss and power variation in single-mode fiber

Experimental Research on Spiral Macrobend Loss of Multimode Fibers

Micro-Bending Influence on Mode-Dependent Loss

Study of macro-bending loss dependence on design parameters of anti-resonant hollow core fibers

Theoretical and Experimental Study of Macrobending Losses in Coated Single-Mode Fibers

Macrobending Loss Measurements of G.657 Fiber with Suppression of Ripple Effect Induced by Whispering Gallery Modes

Research of Bent Waveguide Optimization

Bending-Induced Optical Loss in Random-Hole Optical Fibers

Calculate and analysis curved optical waveguide with FDTD

Loss Reduction in Sharply Bent Optical Nanofibers by Coupling with Au Nanoparticles

Analytical formulation for the bend-loss in single-ring hollow-core photonic crystal fibers

The supersymmetry method of random matrix theory

Bend loss in single-mode fibers

A Semi-Analytical Calculation Method of Bending Loss for Large-Mode-area Fibers with Arbitrary Refractive-Index Profile