Abstract:Field-scale application of the microbial fuel cell (MFC) technology faces a major constraint due to the widely used high-cost proton exchange membrane Nafion, prompting lately, the development of ceramic membranes using different clay minerals. In the present study, the characteristics and applicability of a novel ceramic membrane fabricated using potter's clay (C) blended with varying proportions (0, 5, 10, and 20 wt%) of fly ash (FA), designated as CFA0, CFA5, CFA10, and CFA20, were assessed for cost-effective and sustainable use in MFC. On assessing the properties of the membrane, CFA10 was found to exhibit superior quality with fine pore size distribution (average 0.49 μm) favoring higher water uptake and less oxygen diffusion. The CFA10 membrane showed a maximum proton mass transfer coefficient (4.32 ± 0.04 × 10-5 cm/s) that was about three times that of the control CFA0. The oxygen mass transfer coefficient of CFA10 was 5.13 ± 0.12 × 10-5 cm/s, which was about 40% less than in the control. X-ray diffraction (XRD) analysis of CFA membrane revealed the richness of quartz, which facilitates proton conductance and water retention. The CFA10 membrane fitted MFC demonstrated a peak power output of 4.57 W/m3 (twice that in CFA0) with an average of 80.02 ± 0.86% COD removal and 68.03 ± 0.13% coulombic efficiency in a long-term study indicating its improved applicability and durability. Electrochemical kinetics involving cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) also affirmed the efficacy of CFA10 membrane in MFC showing peak current output of 13.95 mA and low ohmic resistance (74.2 Ω). The novel (CFA10) ceramic membrane amalgamated with the coal fly ash, a waste of concern, shows promise for high MFC performance at a much reduced (98% less) cost that can be used for sustainable scale-up of the technology.

Modification of clayware ceramic membrane for enhancing the performance of microbial fuel cell

Fabrication of Catalytic Ceramic Nanofiber Membrane with High Permeability and Superior Catalytic Performance

Vermiculite nanosheet augmented novel proton exchange membrane for microbial fuel cell

Clay Nanosheets As Charged Filler Materials for High-Performance and Fouling-Resistant Thin Film Nanocomposite Membranes

Goethite supplemented natural clay ceramic as an alternative proton exchange membrane and its application in microbial fuel cell

Characterization and application of novel fly ash blended ceramic membrane in MFC for low-cost and sustainable wastewater treatment and power generation

A Comprehensive Study of Custom-Made Ceramic Separators for Microbial Fuel Cells: Towards “Living” Bricks

Doped polymethyl methacrylate (PMMA) as proton exchange membrane for microbial fuel cell

Performance evaluation of microbial fuel cell using a radiation synthesized low density polyethylene-grafted-poly (glycidyl methacrylate-co-vinyl acetate) as a proton exchange membrane

Electricity and catholyte production from ceramic MFCs treating urine

Development of a Novel Membrane-less Microbial Fuel Cell (ML-MFC) with a Sandwiched Nitrifying Chamber for Efficient Wastewater Treatment

Development of a Novel Composite Polymer Electrolyte Membrane for Application as a Separator in a Dual Chamber Microbial Fuel Cell

Improving MFC efficiency in power generation and COD removal by using protic ionic liquid in MWCNT-CS-2-aminothiazole-SO 3 H nanoparticle-infused sulfonated PES

Effect of simple interventions on the performance of a miniature MFC fed with fresh urine

Strategic development and performance evaluation of functionalized tea waste ash-clay composite as low-cost, high-performance separator in microbial fuel cell

Facile Pyrrole Oxidative Polymerization with Ionic Liquid to Modify Ceramic Membrane for Sustainable Fouling Control

Optimizing Sodium Alginate/PVA Polymer Electrolyte Membrane with Montmorillonite for Enhanced Architectural Features and Performance in DMFC Application

Preparation and Characterization of Red Mud Modified Chitosan-PVA Composite Membrane for Direct Methanol Fuel Cell

Tubular ceramic performance as separator for microbial fuel cell: A review

Ion Exchange Membrane Cathodes For Scalable Microbial Fuel Cells

Medium-chain-length poly-3-hydroxyalkanoates-carbon nanotubes composite as proton exchange membrane in microbial fuel cell