Abstract:In this study, three cationic surfactants (hexadecyltrimethylammonium chloride, hexadecyldimethylbenzylammonium chloride, and octadecyltrimethylammonium chloride) were used to modify montmorillonite and polyethylene (PE)/maleic anhydride grafted polyethylene (PE-g-MAH)/organic-montmorillonite (Org-MMT) nano-composites, prepared by two blending processes (direct-melt blending and solution blending). X-ray diffractometry and transmission electron microscopy were used to investigate the intercalation behavior and microstructure of composites. Mechanical properties were also tested. It was found that the intercalation effect of PE/PE-g-MAH/Org-MMT could be enhanced by increasing the content of PE-g-MMT, using the silicate modified by a cationic surfactant with a benzyl group or long alkyl chain, adopting the solution-blending method or using high-density polyethylene as matrix. The degree of crystallinity of composites and the crystalline thickness perpendicular to the crystalline plane [like (110) and (200)] decreased with increasing amounts of PE-g-MAH and, under certain prescription, the crystalline thickness of the composite made by the solution method was much smaller than that made by direct-melt blending. This clearly showed that Org-MMT and PE-g-MAH had a heterogeneous nucleation effect on crystallization of PE from the melt, resulting in a decrease of crystalline thickness, and the heterogeneous nucleation effect was more evident in the nanocomposite made by the solution-blending method than in that made by the direct-melt intercalation process. The tensile strength initially increased and then decreased with increasing contents of PE-g-MAH. The maximum value in tensile strength (23.3 MPa) was achieved when the concentration of PE-g-MAH was 6 wt %. The impact strength increased concomitantly with the content of PE-g-MAH; it was 122.2 J/m when the concentration of PE-g-MAH was 9 wt %. (C) 2004 Wiley Periodicals, Inc.

Preparation, Characterization and Properties of Montmorillonite Modified PTFE/Glass Fiber Composites

In-situ Synthesis, Thermal and Mechanical Properties of Biobased Poly(ethylene 2,5-Furandicarboxylate)/montmorillonite (PEF/MMT) Nanocomposites

Preparation and characterization of organic modified montmorillonite/polylactic acid nanocomposites

Triglycidyl Para -Aminophenol Modified Montmorillonites for Epoxy Nanocomposites and Multi-Scale Carbon Fiber Reinforced Composites with Superior Mechanical Properties

Effect of Surface Modification of Montmorillonite on the Properties of Rigid Polyurethane Foam Composites

Preparation and Antibacterial Property of Modified Montmorillonite as Novel Composite Antibacterial Agent

Superstructure of Quaternary Ammonium Modified Montmorillonite and Its Antibacterial Properties

Preparation, Characterization, Antimicrobial and Cytotoxicity Studies of Copper/Zinc-Loaded Montmorillonite

Polyethylene/maleic Anhydride Grafted Polyethylene/organic‐montmorillonite Nanocomposites. I. Preparation, Microstructure, and Mechanical Properties

Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation

Preparation and Properties of PA6/Epoxy-resin-modified Montmorillonite Nanocomposites

A New Method Combining Modification of Montmorillonite and Crystal Regulation to Enhance the Mechanical Properties of Polypropylene

Preparation, characterization, antimicrobial and cytotoxicity studies of copper/zinc- loaded montmorillonite.

Preparation and Characterization of Protein-Montmorillonite Composites

Effects of surface fluoride-functionalizing of glass fiber on the properties of PTFE/glass fiber microwave composites

Preparation and Characterization of Poly (trimethylene Terephthalate)/montmorillonite Nanocomposites

Multifunctional Montmorillonite/polyhydroxy Butyrate Composites Using Surfactant Structure Modulation Strategy for Packaging Applications

Effect of different ceramic fillers filled with GF/PTFE on the tensile and compressive properties of the composites

Preparation and properties of polytetrafluoroethylene/zinc oxide antibacterial filaments

Study on Organic Montmorillonite Reinforced Epoxy Nano-composite

Co-exchanged Montmorillonite: a Potential Antibacterial Agent with Good Antibacterial Activity and Cytocompatibility.