Abstract:The separation of lignin from black liquor is an attractive option to consider for pulp mills. In modern pulp mills, lignin extraction offers the opportunity of withdrawing an energy surplus in the form of a solid biofuel. The introduction of lignin separation can de-bottleneck pulp mills in which pulp production is limited by recovery boiler capacity. Separated lignin can be used within the mill, e.g. by replacing fuel oil in the lime kiln or fired in a power boiler, or externally e.g. in CHP plants. Today, only half of the wood material (i.e. the cellulose) is used for the production of valuable products. In a more futuristic perspective, separated lignin can be used as a raw material for the production of green chemicals and/or materials replacing oil as a raw material, thus increasing the value created from the wood material. In this thesis, the extraction of lignin in pulp mills, in particular by precipitation from black liquor, was studied with the focus being on quantifying separation properties of the lignin material. After precipitation, the lignin is filtered and washed. Laboratory studies showed that precipitation and filtration is a rather straight-forward process if the right conditions in terms of pH and temperature are used during precipitation. While lignin precipitated from different softwood kraft black liquors taken from the evaporators showed comparable filtration properties, lignin from membrane concentrated black liquors proved to be more difficult to filter. Direct washing of lignin filter cakes proved to be difficult; problems with plugging and uneven washing, in addition to large yield losses, were encountered. These problems were found to be caused by large gradients in pH and ionic strength in the lignin filter cake during washing. A novel washing method was proposed and developed to solve these problems. This process was investigated in laboratory, bench and pilot scale equipment with excellent results in terms of final purity of the lignin product and very low yield losses during separation. Filtration and washing characteristics were quantified and found to be similar in the three different scales that were studied. During the pilot scale trial, more than 8 tonnes of lignin could be produced using the novel separation method, with high levels of purity ( 60%) and calorific value (LHV 25.4 MJ/kg).

Preparation and Characterization of a Water‐Soluble Kraft Lignin

Structural Characterization of Kraft Lignin for Its Green Utilization

Exploring chemical reactions to enhance thermal and dispersion stability of kraft and organosolv lignin

Lignin Structural And Molecular Weight Changes And Their Relationship During Kraft Pulping

Oxidative Coupling of Kraft Lignin Mediated with Hypervalent Iodine Reagent (III) for Enhanced Removal of Dye in Water

Structural Changes of Lignin after Liquid Hot Water Pretreatment and Its Effect on the Enzymatic Hydrolysis.

Cationization of Eucalyptus Kraft LignoBoost Lignin: Preparation, Properties, and Potential Applications

Sustainable Materials from Organosolv Fibers and Lignin, Kraft Fibers, and Their Blends

Precipitation and separation of lignin from kraft black liquor

Investigating the Depolymerization Behavior of Structurally Modified Kraft Lignin in Deep Eutectic Solvents

Levulinic acid: A novel sustainable solvent for lignin dissolution

Evaluation of Organosolv Pretreatment on the Structural Characteristics of Lignin Polymers and Follow-Up Enzymatic Hydrolysis of the Substrates from Eucalyptus Wood.

Evaluation of Differences in Solubility in Organic Solvents of Softwood/Hardwood-Based Industrial Kraft Lignins Using Hansen Parameters and FTIR

Direct Fractionation of Low Molecular Weight Lignin from Eucalyptus Kraft Black Liquor by Green Solvents

Chemical Characterization of Kraft Lignin Prepared from Mixed Hardwoods

Preparation And Characterization Of Lignosulfonate From Alkali Extracted Lignin

Synthesis of condensed lignin model compound and the formation mechanism of LC bonds during kraft pulping

Comparative Evaluation Of Organic Acid Pretreatment Of Eucalyptus For Kraft Dissolving Pulp Production

Isolation and characterization of lignin in black liquor

Preparation and Properties of Kraft Lignin-N-Isopropyl Acrylamide Hydrogel

Investigation of the Chemical Basis for Inefficient Lignin Removal in Softwood Kraft Pulp During Oxygen Delignification