Abstract:A significant challenge is posed in improving the thermal performance of heat exchangers by the reduction of the outlet temperature. To confront this intricacy, distinct water‐based nanofluids with two different material conditions are employed by the established framework. Through comprehensive examination, a novel framework has been developed that offers improved thermal performance by reducing the outlet temperature and providing enhanced cooling compared to other working fluids. Valuable insights into optimizing thermal management systems are demonstrated. Researchers and engineers are actively working on enhancing the efficiency of heat exchangers in engineering applications by developing novel designs, exploring new materials, and utilizing nanofluids. Three kinds of nanofluids with varying concentrations are investigated in this paper. The objective is to assess the performance of N‐shaped double‐pipe heat exchanger used in thermoelectric power plants. The performance has been evaluated using COMSOL Multiphysics software. The findings show that higher nanofluid concentrations resulted in elevated heat transfer coefficients and improved efficiency of N‐shape double pipe heat exchanger. The analysis revealed that a mere 1% rise in the volume fraction of nanofluids enhanced the efficiency of the heat exchanger on average 23% when compared to the base fluid (water). In comparison to the N‐shape double pipe (Inconel 625) heat exchangers, the N‐shape double pipe (copper) heat exchangers appear to be more efficient. The introduction of nanoparticles has a notable impact on the heat transfer coefficients. Specifically, within an N‐shaped double pipe (copper) heat exchanger, the inclusion of a 1% volume fraction results in a 2.09% enhancement in the heat transfer coefficient for Al2O3/water, a 1.3% improvement for Fe3O4/water, and a 1.15% increase for TiO2/water. It also exposed that adding 1% Al2O3/water led to a significant 0.623% increase in effectiveness, while TiO2/water showed a 0.259% rise, and Fe3O4/water exhibited a 0.375% improvement. Moreover, increasing the Reynolds number enhances the Nusselt number for Al2O3/water and Fe3O4/water nanofluids by 55.22%, and for TiO2/water by 54.60% at a 6% volume concentration, leading to additional increases in exchanger efficiency. Therefore, the augmentation in nanofluid concentration leads to a reduction in the temperature pinch points both at the intake and outflow. This observation suggests that nanofluids exhibit a superior ability compared to conventional fluids when it comes to effectively lowering temperatures.

Hydro-thermal performance of normal-channel facile heat sink using TiO2-H2O mixture (Rutile–Anatase) nanofluids for microprocessor cooling

Heat transfer and flow characteristics of hybrid Al2O3/TiO2–water nanofluid in a minichannel heat sink

Hydrothermal performance of mini-channel heat sink using nanofluids/hybrid nanofluids: A numerical study

Thermohydraulic Performance Optimization of Integrated Porous Pin Fins in Microchannel Heat Sink Using Shape Optimization Coupled with NSGA

An evaluation of heat transfer and pressure drop performance of superhydrophobic surfaced integral mini-channel heat sinks with nanofluids

Performance investigation of normal channel facile heat sink using hybrid nanofluid: an experimental and numerical approach

Nanofluids in microchannel heat sinks for efficient flow cooling of power electronic devices

Analyzing Heat Transfer: Experimental and Theoretical Studies on Metal Oxide-Based Binary Nanofluid in Mini Hexagonal Tube Heat Sink

On the assessment of the thermal performance of microchannel heat sink with nanofluid

Investigation on thermal performance of nanofluids in a microchannel with fan-shaped cavities and oval pin fins

Comparison of cooling performance of nanofluid flows in mini/micro-channel stacked double-layer heat sink and single-layer micro-channel heat sink

Thermal analysis of hybrid nanofluids inside a microchannel heat exchanger for electronic cooling

Thermal and hydraulic performance of Al alloy-based 3D printed triangular microchannel heatsink governed by rough walls with graphene and alumina nanofluids as working liquid

Heat transfer and pressure drop analysis of a microchannel heat sink using nanofluids for energy applications

Effects of Nanofluid Flow in Micro channel Heat Sink for Forced Convection Cooling of Electronics Device: A Numerical Simulation

Numerical study and optimization of thermal efficiency for a pin fin heatsink with nanofluid flow by modifying heatsink geometry

Numerical study on hydrothermal performance in a microchannel with gradient array of ribs and pin fins

Numerical investigation of thermal performance augmentation of nanofluid flow in microchannel heat sinks by using of novel nozzle structure: sinusoidal cavities and rectangular ribs

Hybrid Mini/Micro-Channel Heat Sink Using Liquid Metal and Water As Coolants

Thermal performance investigation of N‐shape double‐pipe heat exchanger using Al2O3, TiO2, and Fe3O4‐based nanofluids

Numerical Study on Hybrid Discontinuous Microchannel Heat Sink Combining Manifold with Pin Fins (DMC-MPF) for High Power Electronic Device