Abstract:A significant challenge is posed in improving the thermal performance of heat exchangers by the reduction of the outlet temperature. To confront this intricacy, distinct water‐based nanofluids with two different material conditions are employed by the established framework. Through comprehensive examination, a novel framework has been developed that offers improved thermal performance by reducing the outlet temperature and providing enhanced cooling compared to other working fluids. Valuable insights into optimizing thermal management systems are demonstrated. Researchers and engineers are actively working on enhancing the efficiency of heat exchangers in engineering applications by developing novel designs, exploring new materials, and utilizing nanofluids. Three kinds of nanofluids with varying concentrations are investigated in this paper. The objective is to assess the performance of N‐shaped double‐pipe heat exchanger used in thermoelectric power plants. The performance has been evaluated using COMSOL Multiphysics software. The findings show that higher nanofluid concentrations resulted in elevated heat transfer coefficients and improved efficiency of N‐shape double pipe heat exchanger. The analysis revealed that a mere 1% rise in the volume fraction of nanofluids enhanced the efficiency of the heat exchanger on average 23% when compared to the base fluid (water). In comparison to the N‐shape double pipe (Inconel 625) heat exchangers, the N‐shape double pipe (copper) heat exchangers appear to be more efficient. The introduction of nanoparticles has a notable impact on the heat transfer coefficients. Specifically, within an N‐shaped double pipe (copper) heat exchanger, the inclusion of a 1% volume fraction results in a 2.09% enhancement in the heat transfer coefficient for Al2O3/water, a 1.3% improvement for Fe3O4/water, and a 1.15% increase for TiO2/water. It also exposed that adding 1% Al2O3/water led to a significant 0.623% increase in effectiveness, while TiO2/water showed a 0.259% rise, and Fe3O4/water exhibited a 0.375% improvement. Moreover, increasing the Reynolds number enhances the Nusselt number for Al2O3/water and Fe3O4/water nanofluids by 55.22%, and for TiO2/water by 54.60% at a 6% volume concentration, leading to additional increases in exchanger efficiency. Therefore, the augmentation in nanofluid concentration leads to a reduction in the temperature pinch points both at the intake and outflow. This observation suggests that nanofluids exhibit a superior ability compared to conventional fluids when it comes to effectively lowering temperatures.

Performance investigation of normal channel facile heat sink using hybrid nanofluid: an experimental and numerical approach

Thermohydraulic Performance Optimization of Integrated Porous Pin Fins in Microchannel Heat Sink Using Shape Optimization Coupled with NSGA

Hydrothermal performance of mini-channel heat sink using nanofluids/hybrid nanofluids: A numerical study

Heat transfer and flow characteristics of hybrid Al2O3/TiO2–water nanofluid in a minichannel heat sink

Hydro-thermal performance of normal-channel facile heat sink using TiO2-H2O mixture (Rutile–Anatase) nanofluids for microprocessor cooling

Efficient Heat Transfer Augmentation in Channels with Semicircle Ribs and Hybrid Al2O3-Cu/Water Nanofluids

Artificial neural network and numerical analysis for performance enhancement of hybrid microchannel-pillar-jet impingement heat sink using Al2O3-water and CuO-water nanofluids

Investigation on thermal performance of nanofluids in a microchannel with fan-shaped cavities and oval pin fins

Thermal performance investigation of N‐shape double‐pipe heat exchanger using Al2O3, TiO2, and Fe3O4‐based nanofluids

Study on the flow and heat transfer performance of nanofluid in a novel manifold microchannel heat sink combining trapezoidal cross-section and curved corners

Investigating the thermal performance of a hybrid Ag-TiO 2 /water nanofluid in a copper porous nanochannel: Examine the meshless molecular dynamics simulation

Nanofluids in microchannel heat sinks for efficient flow cooling of power electronic devices

On the assessment of the thermal performance of microchannel heat sink with nanofluid

Investigation of the thermo-convective characteristics of a flow passing through a partially heated channel filled with a porous medium saturated with a hybrid nanofluid

CFD investigation of thermal performance of aluminum oxide nanofluid in channel

Thermal analysis of hybrid nanofluids inside a microchannel heat exchanger for electronic cooling

Numerical investigation of thermal performance augmentation of nanofluid flow in microchannel heat sinks by using of novel nozzle structure: sinusoidal cavities and rectangular ribs

Heat transfer and pressure drop analysis of a microchannel heat sink using nanofluids for energy applications

Heat transfer analysis of Cu–Al2O3 hybrid nanofluid with heat flux and viscous dissipation

Computer simulation of Cu: ALOOH/Water in a microchannel heat sink using a porous media technique and solved by numerical analysis AGM and FEM

Thermal analysis of metal foam and nanofluid integration in an asymmetrical heated channel