Abstract:This paper presents a comprehensive numerical simulation study focused on the cooling of integrated toroidal octagonal inductor using nanofluids within a microchannel heat sink. The investigation utilizes COMSOL Multiphysics 6.0 integrated with the Fluid Flow and Conjugate Heat Transfer Module. The primary objective is to explore and understand fluid flow and heat transfer characteristics within the integrated inductor. The study involves testing three distinct fluids, water, CuO-water nanofluid, and Al2O3-water nanofluid, under laminar flow conditions within microchannels. The choice of fluid plays a significant role in heat transfer, interacting with the microchannel geometry to optimize performance. Three-dimensional computational fluid dynamics (CFD) models are meticulously developed; focusing on toroidal inductors equipped with micro pin fins heat sinks. The study commences by detailing the geometry of the micro coil and the integrated heat sink. The simulation encompasses a mathematical model that captures the intricate interplay between the governing Navier-Stokes equations for fluid dynamics and the heat transfer equations within the integrated inductor. As φ increases, temperature, viscosity, and pressure decrease. CuO-water and Al2O3-water nanofluids play a significant role in influencing laminar flow and key thermal parameters in the toroidal inductor. These nanofluids, which consist of base fluids (water) with dispersed nanoparticles (CuO or Al2O3), are employed as cooling agents to enhance heat transfer. The presence of nanoparticles in the fluid alters its thermal properties, leading to changes in the flow dynamics and overall heat dissipation within the toroidal inductor.The laminar flow characteristics are affected by the nanofluid's viscosity, density, and thermal conductivity. Additionally, the Nusselt number, Reynolds number, and thermal resistance are key thermal parameters that reflect the performance of the cooling system. The nanofluid's influence on these parameters is crucial for understanding and optimizing the thermal management of the integrated toroidal inductor. The enhancement of heat dissipation in the toroidal inductor is achieved through improved thermal properties of the nanofluid. Higher nanoparticle concentrations result in better heat transfer rates, leading to lower temperatures in the toroidal inductor. This, in turn, improves the overall efficiency and performance of the cooling system. The viscosity of the nanofluid is influenced by the presence of nanoparticles. The pressure within the microchannels is also affected by the nanoparticle concentration. An increase in φ can lead to changes in pressure drop along the microchannels. Understanding these variations is crucial for designing an effective cooling system.

Numerical simulation on thermohydraulic performance of different types of nanofluids in a corrugated-triangular channel

Numerical investigation of heat transfer and fluid flow characteristics of ternary nanofluids through convergent and divergent channels

Effects of Nanofluid Flow in Micro channel Heat Sink for Forced Convection Cooling of Electronics Device: A Numerical Simulation

Numerical analysis heat transfer enhancement in round corrugated channels using nano-fluids

Numerical investigation of turbulent flow and heat transfer of nanofluid inside a wavy microchannel with different wavelengths

Enhancing Thermal–Hydraulic Performance in Nuclear Reactor Subchannels with Al2O3 Nanofluids: A CFD Analysis

Numerical Study of Three-Dimensional Models of Single- and Two-Phase Nanofluid Flow through Corrugated Channels

Numerical investigation of thermal performance augmentation of nanofluid flow in microchannel heat sinks by using of novel nozzle structure: sinusoidal cavities and rectangular ribs

Nanofluids in microchannel heat sinks for efficient flow cooling of power electronic devices

Hydrothermal performance of mini-channel heat sink using nanofluids/hybrid nanofluids: A numerical study

Numerical simulation of convective heat transfer behavior of nanofluids in elliptical microchannels

Numerical evaluation of the heat transfer in a shell and corrugated coil tube heat exchanger with three various water‐based nanofluids

Numerical Simulation for Cooling of Integrated Toroidal Octagonal Inductor Using Nanofluid in a Microchannel Heat Sink

Numerical study of the optimization of the thermal and flow characteristics of a collector design of microchannels with two inlets and outlets, containing a nanofluid and a water-based fluid

A numerical study of water based nanofluids in shell and tube heat exchanger

Simulation of Nanofluid Flow Through Rectangular Microchannel by Modified Thermal Dispersion Model

Thermal analysis of hybrid nanofluids inside a microchannel heat exchanger for electronic cooling

Numerical simulations of thermal heat conservation in hybrid nanofluids with chemical reaction, viscous dissipation, and inclination

Heat transfer and flow features of Al2O3-water nanofluids flowing through a circular microchannel - Experimental results and correlations

Computational Modelling and Simulations to Study the Thermal Enhancement in Nanofluid Flow in Undulating Wavy Cavity of a Cylinder: Finite Element Analysis

Statistical computation for heat and mass transfers of water-based nanofluids containing Cu, Al2O3, and TiO2 nanoparticles over a curved surface