Abstract:Aluminum alloys are extensively used in many fields such as aeronautics, astronautics, vehicle manufactures and living products clue to their good mechanical properties and anti-corrosion performance. Traditionally, the most effective corrosion protection technologies are based on the use of Cr6+ containing formulations to extend the applications of aluminum alloys in high corrosive media such as chlorides containing solutions. However, the recent recognition that chromates are highly toxic and carcinogenic has led to extensive research to develop new alternatives. Many works have been published using different conditions to obtain rare earth (RE) conversion layers on several aluminum substrates. Unfortunately, these reported anti-corrosion technologies based on RE modified films presented several drawbacks including long formation time, high formation temperature and even high potential in some cases. The goal of the present work is to introduce the novel cathode electrophoresis technique to quickly deposit cerium modified film on the surface of Al 5083. The morphology and structure of the RE. film were characterized by SEM, EDS and XRD, the corrosion resistance was investigated by EIS and potentiodynamic polarization curves in 0.1 mol/L NaCl solution. The results showed that uniform CeO2 film of 0.8 mu m thickness can be prepared by cathode electrophoresis process in 0.1 mol/L Ce(NO3)(3) ethanol solution at a voltage of 12 V for 60 s. Polarization curves confirmed its excellent protective property through inhibiting the cathodic reaction. Impedance data collected from EIS in 0.1 mol/L NaCl solution remained capacitive for 31 d, which indicated the lack of localized corrosion. With the increase of exposure time, the charge-transfer resistance R-p became higher, the surface capacitance C-t nearly kept constant and cracks of the film reduced obviously, demonstrating a self-healing property. Apparently local cathodes were covered during the RE modification processes, thereby reducing the driving force for pitting.

Influence of the processes of additional phosphate post-treatment of ceria conversion coatings deposited on Al 1050 on their corrosion protective behavior

Influence of the Chemical Composition of Ceria Conversion Coatings, Sealed in Solution of NaH2PO4 and Ca(NO3)2, on the Corrosion Behavior of Aluminum

Corrosion and in vitro characteristics of cerium phosphate based chemical conversion coating on AZ31 magnesium alloy

Selection of appropriate electrochemical deposition regime for cerium conversion coating on anodized AA2024-T3 aircraft alloy

Electrochemical Study of Corrosion Behavior of Rare Earth Based Chemical Conversion Coating on Aerospace Aluminum Alloy

Characterization and Cathode Electrophoresis Deposition of Cerium Modified Films on Al 5083

Protective ability and impedance response of sol–gel reversely transformed ceria conversion coating on aluminium

Nano Al2O3/phosphate composite conversion coating formed on magnesium alloy for enhancing corrosion resistance

Investigation on the composition and corrosion resistance of cerium-based conversion treatment by alkaline methods on aluminum alloy 6063

Corrosion inhibition analysis on cerium induced hydrophobic surface of Al-6061/SiC/Al2O3 hybrid composites

Development of potentiostatically deposited cerium conversion coating for Mg alloys

Preparation of Conductive and Corrosion Resistant Phosphate Conversion Coating on AZ91D Magnesium Alloy

Corrosion and Protection Characteristics of Phosphate Coatings on Aluminum Alloy 6061 Using Yttrium Oxide as Additive

Corrosion Properties of Alumina Coatings on Steel and Aluminum Deposited by Ion Beam Assisted Deposition

The effects of chemical conversion parameters on morphology and corrosion performance of calcium phosphate coating on AZ31 alloy

Effect of phosphating solution pH value on the formation of phosphate conversion coatings for corrosion behaviors on AZ91D

Improved corrosion resistance of PEO-coated 7085Al alloy via a novel organic and inorganic sealing-treatment combination

Preparation and Corrosion Behaviour of Cerium Based Sol-gel Composite Coatings on AA2024-T4 Aluminum Alloy

Preparation and corrosion resistance of titanium–zirconium–cerium based conversion coating on 6061 aluminum alloy

PREPARATION AND CORROSION ELECTROCHEMISTRY BEHAVIOR OF CERIUM-BASED CHEMICAL CONVERSION COATING ON AZ91 MAGNESIUM ALLOY

Electrochemical corrosion resistance of aluminum alloy 6101 with cerium-based coatings in an alkaline environment