Abstract:Aluminum alloys are extensively used in many fields such as aeronautics, astronautics, vehicle manufactures and living products clue to their good mechanical properties and anti-corrosion performance. Traditionally, the most effective corrosion protection technologies are based on the use of Cr6+ containing formulations to extend the applications of aluminum alloys in high corrosive media such as chlorides containing solutions. However, the recent recognition that chromates are highly toxic and carcinogenic has led to extensive research to develop new alternatives. Many works have been published using different conditions to obtain rare earth (RE) conversion layers on several aluminum substrates. Unfortunately, these reported anti-corrosion technologies based on RE modified films presented several drawbacks including long formation time, high formation temperature and even high potential in some cases. The goal of the present work is to introduce the novel cathode electrophoresis technique to quickly deposit cerium modified film on the surface of Al 5083. The morphology and structure of the RE. film were characterized by SEM, EDS and XRD, the corrosion resistance was investigated by EIS and potentiodynamic polarization curves in 0.1 mol/L NaCl solution. The results showed that uniform CeO2 film of 0.8 mu m thickness can be prepared by cathode electrophoresis process in 0.1 mol/L Ce(NO3)(3) ethanol solution at a voltage of 12 V for 60 s. Polarization curves confirmed its excellent protective property through inhibiting the cathodic reaction. Impedance data collected from EIS in 0.1 mol/L NaCl solution remained capacitive for 31 d, which indicated the lack of localized corrosion. With the increase of exposure time, the charge-transfer resistance R-p became higher, the surface capacitance C-t nearly kept constant and cracks of the film reduced obviously, demonstrating a self-healing property. Apparently local cathodes were covered during the RE modification processes, thereby reducing the driving force for pitting.

Development of potentiostatically deposited cerium conversion coating for Mg alloys

PREPARATION AND CORROSION ELECTROCHEMISTRY BEHAVIOR OF CERIUM-BASED CHEMICAL CONVERSION COATING ON AZ91 MAGNESIUM ALLOY

Corrosion resistance and electrical conductivity of V/Ce conversion coating on magnesium alloy AZ31B

The Fabrication of a CeO2 Coating Via Cathode Plasma Electrolytic Deposition for the Corrosion Resistance of AZ31 Magnesium Alloy

Selection of appropriate electrochemical deposition regime for cerium conversion coating on anodized AA2024-T3 aircraft alloy

Corrosion and in vitro characteristics of cerium phosphate based chemical conversion coating on AZ31 magnesium alloy

Preparation and corrosion resistance studies of nanometric sol–gel-based CeO2 film with a chromium-free pretreatment on AZ91D magnesium alloy

Effects of Surface Coating on the Electrochemical Properties of Amorphous CeMg12 Composite

A Chromate-Free and Convenient Route to Fabricate Thin and Compact Conversion Coating for Corrosion Protection on LZ91 Magnesium Alloy

Corrosion Resistance of Cerium-Doped Zinc Calcium Phosphate Chemical Conversion Coatings on AZ31 Magnesium Alloy

Preparation of Conductive and Corrosion Resistant Phosphate Conversion Coating on AZ91D Magnesium Alloy

Study on Anticorrosive Cerium Conversion Coating of Cf/6061Al Composite Surface

Fabrication and properties of the superhydrophobic ceria‐based composite coating on magnesium alloy

Characterization and Cathode Electrophoresis Deposition of Cerium Modified Films on Al 5083

Cerium nitrate and stearic acid modified corrosion-resistant micro-arc oxidation coating on magnesium alloy

Grain Refinement Promotes the Formation of Phosphate Conversion Coating on Mg Alloy AZ91D with High Corrosion Resistance and Low Electrical Contact Resistance

Surface evaluation and electrochemical behavior of cerium conversion coating modified with silane on magnesium alloy

Improving Corrosion Resistance of C_f/Mg Composites using Rare Earth Conversion Coatings

Corrosion Resistance of a Ceria/polymethyltrimethoxysilane Modified Mg-Al-layered Double Hydroxide on AZ31 Magnesium Alloy

The Study of a Phosphate Conversion Coating on Magnesium Alloy AZ91D: III. Nano-particle Modification

Cerium and Silane Conversion Coatings on AZ91 Magnesium Alloy