Abstract:Incorporating MXene nanomaterials in coating is an effective strategy to fabricate anticorrosive coatings with superior corrosion resistance, depending on its characteristic structure and nature. However, it may accelerate the corrosion rate of metal once forming galvanic corrosion by direct contact with the substrate due to its high conductivity and hydrophilicity. Herein, we used 1H, 1H, 2H, 2H‐Perfluorodecyltrichlorosilane (PFDTS) to functionalize Ti3C2Tx nanosheets to obtain superhydrophobic Ti3C2Tx hybrids, which greatly enhances the hydrophobicity of Ti3C2Tx nanosheets. Then a new strategy was designed to construct superhydrophobic Ti3C2Tx/epoxy/cerium conversion (STECC) composite coating with sandwich‐like structure, which consisted of bottom cerium conversion coating, intermediate epoxy coating and top superhydrophobic Ti3C2Tx coating layer. The underlying cerium conversion layer and intermediate epoxy coating acted as the protective coating not only improve the corrosion protection ability of substrate but also isolate the top superhydrophobic Ti3C2Tx layer from direct contact with the substrate, which could eliminate direct contact between MXene and Mg alloy to further restrain the corrosion‐promotion effect of Ti3C2Tx. The STECC with unique structure exhibited excellent water repellency with water contact angle of 155.8° and sliding angle of 5°, which endowed the metal substrate with outstanding antifouling property. Moreover, the STECC composite coating illustrated robust mechanical and chemical stability. Electrochemical experimental results demonstrated that the modified MXene nanosheets could remarkably improve the corrosion protection performance of STECC composite coating, and the corrosion current density decreased from 5.905 × 10‐3 A⋅cm‐2 of bare substrate to 3.602 × 10‐8 A⋅cm‐2 of the coated specimen. Moreover, the impedance modulus of STECC coating reached the value of approximately 7.49 ×106 Ω·cm2 and increased 4 orders of magnitude compared with the Mg substrate, indicating the excellent anticorrosion property of the STECC coating. The composite coating studied here may offer valuable insights and inspiration toward developing MXene‐based coating for high‐performance anticorrosion. This article is protected by copyright. All rights reserved.

Fabrication and properties of the superhydrophobic ceria‐based composite coating on magnesium alloy

Design of superhydrophobic coupling cerium conversion coating for corrosion protection of magnesium alloy: Experimental and theoretical studies

Fabrication of Ti3C2Tx‐based superhydrophobic composite coating for reinforcement corrosion resistance of AZ31B Mg alloy

Superhydrophobic Corrosion-Resistant Coating of AZ91D Magnesium Alloy: Preparation and Performance

Corrosion-resistant superhydrophobic composite coating with mechanochemical durability

Preparation of robust, self-cleaning and anti-corrosion superhydrophobic Ca-P/chitosan (CS) composite coating on AZ31 magnesium alloy

Cerium nitrate and stearic acid modified corrosion-resistant micro-arc oxidation coating on magnesium alloy

Cerium and Silane Conversion Coatings on AZ91 Magnesium Alloy

Superhydrophobic composite coating for reliable corrosion protection of Mg alloy

Superhydrophobic double layered MgAl-LDH/epoxy composite coatings for enhanced anticorrosion performance of magnesium alloys

Corrosion Resistance of Superhydrophobic Mg(OH)2/Calcium Myristate Composite Coating on Magnesium Alloy AZ31

Facile fabrication of robust superhydrophobic coating for enhanced corrosion protection on AZ91 magnesium alloy by electroless Ni-B/GO plating

Construction of Superhydrophobic GO/Ca Coating on AZ31 Magnesium Alloy for Enhanced Anti-corrosion Performance

Fabrication of superhydrophobic needle-like Ca-P coating with anti-fouling and anti-corrosion properties on AZ31 magnesium alloy

Corrosion resistance and anti-soiling performance of micro-arc oxidation/graphene oxide/stearic acid superhydrophobic composite coating on magnesium alloys

Corrosion-resistant and superhydrophobic nickel‐phosphorus/nickel/PFDTMS triple-layer coating on magnesium alloy

Preparation and anti-corrosion Properties of SiO2@MWCNTs@PFOTES Superhydrophobic Coatings on Magnesium Alloy

Designing attapulgite-based self-healing superhydrophobic coatings for efficient corrosion protection of magnesium alloys

Fabrication and properties of super-hydrophobic microstructures on magnesium alloys by laser–chemical etching

Fabrication of hydrophobic surface with hierarchical structure on Mg alloy and its corrosion resistance