Abstract:Al-Mg alloys used in the shipbuilding industry were tested. The most commonly used alloy AW 5083 and alloy AW 5059 with higher strength properties were selected. Both native materials and their joints welded by the traditional MIG arc welding method and the friction stir welding (FSW) method were tested. Both methods are approved by classification societies which allow them to be used in construction by the shipbuilding industry. The research was carried out in two stages. The first study was an "in-situ tensile test in SEM". The surfaces of the deformed specimens' changes were observed in the vacuum chamber of a Philips XL30 scanning electron microscope. During the tests, the force and elongation of the specimen were recorded. In addition, a chemical analysis of selected precipitates was performed by energy dispersive spectrometry (EDS) using the EDAX adapter. Slip lines were observed on the surface of the tested specimens, which are arranged in bands in the native material and in a disordered manner in the joints welded by MIG and FSW methods. Cracking starts mainly through decohesion at the matrix-precipitate interfaces. In the second stage of the research, slow strain rate testing (SSRT) was carried out in accordance with ISO 7539-7:2005. The tests were carried out on a specially designed test stand, where the FT-5307 strain gauge force sensor with a measuring range of 0-16 kN was used to measure the force value. The PSz 20 transducer with a measuring range of 0-20 mm was also used. The test consisted of subjecting the specimen to increasing deformation with the strain rate έ = 1.6 × 10-6 s-1 until destruction. The fracture surfaces of the SSRT specimens were subjected to fractographic analysis using a Philips XL-30 scanning electron microscope. The results of fractographic studies after the SSRT test of the native materials and their joints welded by the MIG and FSW methods indicate that the trans-crystalline cracking mechanism is dominant, characterized by ductile fracture, and cracks are initiated at the interfaces of the precipitates with the matrix. The research results show that the plastic deformation increases and micro-cracks develop and merge into a main crack, which, after reaching the critical dimension, rapidly develops, causing the destruction of the material. The fracture micrographs of the specimens of base metals and their joints welded by FSW and MIG after the SSRT test allow us to conclude that the cracking mechanism was trans-crystalline ductile.

In-Service Brittle Fracture Resistance Degradation of Steel in a Ship-to-Shore Portal Crane

Effects of Crack Position on Fatigue Life of Large Seamless Storage Vessels Made of 4130X for Hydrogen Refueling Station

Specimen Size Effect on the Tensile Properties of Rolled Steel of Long-Term-Operated Portal Crane

Effect of Corrosion-Induced Structural Degradation on the Ultimate Strength of a High-Tensile-Steel Ship Hull

Corrosion Development of Carbon Steel Grids and Shear Connectors in Cracked Composite Beams Exposed to Wet-Dry Cycles in Chloride Environment.

Design and Manufacturing Technology of Round Samples for Studying the Effect of Defects on the Mechanical Properties of Welds

Experimental and numerical study of residual ultimate strength of hull plate subjected to coupled damage of pitting corrosion and crack

The Cracking of Al-Mg Alloys Welded by MIG and FSW under Slow Strain Rating

Fatigue crack growth test and characteristics analysis for ultra-thick crack-arrest steel

Experimental investigation on monitoring the evolution of fatigue microcracks in marine high-strength steel by nonlinear ultrasonic technique

Improvement Measure of Sub-Fracture During Tensile Test of High Strength Ship Plate

Comparative study on ductile fracture prediction of high-tensile strength marine structural steels

Residual Ultimate Strength of Hull Structures with Crack and Corrosion Damage

A Study of Container Ship Structures' Ultimate Strength under Corrosion Effects

A study on residual ultimate strength of steel unstiffened plate with a crack

EXPERIMENTAL STUDY OF THE IMPACT FRACTURE BEHAVIOR OF FH550 OFFSHORE PLATFORM STEEL

Crack growth direction effects on corrosion-fatigue behaviour of offshore wind turbine steel weldments

Impact Fracture Surfaces as the Indicators of Structural Steel Post-Fire Susceptibility to Brittle Cracking

Assessment of Operational Degradation of Pipeline Steels

The Fatigue Crack Growth under Compressive to Compressive Fluctuating Loading

Security life assessment of crack flaws in high tensile steel deck of large container ships