Abstract:This work reports a low-cost and easy manufactured optical fiber bubble Fabry–Perot (FP) interferometer (FPI) sensor with optimized manufacturing parameters. The microbubble sensor is fabricated by welding a multimode fiber (MMF) to a single-mode fiber (SMF), followed by hydrofluoric acid (HF) corroded and discharge treatment at the end of the MMF. The manufacturing process is explored and optimized. The optical power of the interference light was increased and forming stability of the bubbles was improved by controlling the corrosion time, type of arc discharge, discharge intensity, discharge time, and number of discharges. To study the relationship between the optical power and the subjected pressure and temperature, a theoretical model of sensing principle is established, and finite element simulation is carried out to analyze the deformation of bubbles under the influence of the external environment. Experimental results show that the sensor has a pressure sensitivity of dBm/MPa and a temperature sensitivity of dBm/°C. The study gives the influence of multiple preparation parameters on the quality of the sensor, which has good scientific value. The sensor has good prospects in pressure measurement.

Optical Fiber Fabry-Perot Interferometer Sensor Fabricated by Femtosecond Laser-Induced Water Breakdown

Optical Fiber Fabry-Perot Interferometer Cavity Fabricated by Femtosecond Laser-Induced Water Breakdown for Refractive Index Sensing.

Sensitivity-enhanced Optical Sensor Based on Multilayer Coated Fabry–Pérot Interferometer

Visibility-Enhanced In-Line Fabry-Pérot lnterferometers by the Use of Femtosecond Lasers

Single microchannel high-temperature fiber sensor by femtosecond laser-induced water breakdown.

Photonic Crystal Fiber Fabry-Perot Sensor Fabricated Using Femtosecond Laser

Intensity-Interrogated Sensor Based on Cascaded Fabry–Perot Laser and Microring Resonator

Fabry-Perot Interference Fiber Acoustic Wave Sensor Based on Laser Welding All-Silica Glass

Optical fiber micro-hole sensor fabricated with femtosecond laser

Micro Fabry-Perot interferometers in silica fibers machined by femtosecond laser.

Ultrasensitive Liquid Refractometer Based on a Mach-Zehnder Micro-Cavity in Optical Fibre Fabricated by Femtosecond Laser-Induced Water Breakdown

Liquid refractive index sensor with three-cascaded microchannels in single-mode fiber fabricated by femtosecond laser-induced water breakdown

High-Pressure and High-Temperature Characteristics of A Fabry-Perot Interferometer Based on Photonic Crystal Fiber

An Open-Cavity Fiber Fabry-Perot Interferometer Fabricated by Femtosecond Laser Micromachining for Refractive Index Sensing

High-speed spectrum demodulation of fiber-optic Fabry–Perot sensor based on scanning laser

Micromachining of an In-Fiber Extrinsic Fabry-Perot Interferometric Sensor by Using a Femtosecond Laser

Simultaneous Measurement of Seawater Salinity and Temperature With Composite Fiber-Optic Interferometer

Laser Self-Mixing Interference Fibre Sensor

An Optical Fiber Fabry–Perot Pressure Sensor With Optimized Manufacturing Parameters

An Optical Fiber Pressure Sensor Based on F-P Interferometry and Intensity Demodulation

Optical Fiber Probe Microcantilever Sensor Based on Fabry–Perot Interferometer