Abstract:The performance of lithium-sulfur batteries is deteriorated by the inferior conductivity of sulfur, the shuttle effect of lithium polysulfides (LiPSs), sluggish redox kinetics of polysulfide intermediates and serious volumetric expansion of sulfur. To overcome these challenges, we report a versatile route to prepare multi-functional nanocomposites with tuable hierarchical structure via ammonium hydroxide (NH3·H2O) induced self-assembly. The versatility of the system has been demonstrated that the organization of the hierarchical structure can be regulated by adding different amount of NH3·H2O, and WS2 and Co9S8 with nitrogen-doped carbon coating (denoted as WS2@NC and Co9S8@NC) can be prepared by adding different precursor salts. When the as-prepared materials are applied for Li-S batteries, the WS2@NC composite exhibits a reversible capacity of 1107.4 mAh g−1 at 0.1 C after 500 cycles and even 728.9 mAh g−1 at 2 C for 1000 cycles, which is significantly better than the Co9S8 counterpart and other reported WS2 sulfur hosts. Experimentally, the advantageous performance of WS2 could be attributed to its higher surface area and total pore volume, giving rise to the easier access to electrolyte and better ability to buffer the volume change during the charge/discharge process. Theoretically, the density function theory (DFT) calculation reveals that the as-prepared WS2 has a higher binding energy towards LiPSs as well as a lower energy barrier for Li+ diffusion on the surface than Co9S8. More significantly, the density of states (DOS) analysis further confirms that the superior performance is mainly ascribed to the more prominent shifting and the more charge compensation from d band of W than Co, which increase electronic concentration and give more hybridization of d-p orbitals in the Fermi level of the adsorbed Li2S4 to accelerate the lithium polysulfide interfacial redox and conversion dynamics in WS2. By proposing this mechanism, this work sheds new light on the understanding of catalytic conversion of lithium polysulfides at the atomic level and the strategy to develop advanced cathode materials for high-performance lithium-sulfur batteries.

Study on electrochemical performance of WS2 cathode material for thermal battery prepared by one-step synthesis

Defect Engineering can Enhance the Electrochemical Performance of WS2 for Thermal Batteries

Scalable Preparation and Improved Discharge Properties of FeS2@CoS2 Cathode Materials for High-Temperature Thermal Battery

Vacancy engineering in transition metal sulfide and oxide composite material for thermal batteries of high specific capacity

High utilization rate thermal batteries using PbCl2 as a cathode material

Synthesis and electrochemical performances of cathode material Fe0.5Co0.5S2 for thermal batteries by a facile molten salt method

Preparation and electrochemical performance of FG/SnS 2 composite as a cathode material for high power thermal batteries

A Scalable Sulfuration of WS 2 to Improve Cyclability and Capability of Lithium-Ion Batteries

Revealing dynamic sulfidation of WC-WO 3 heterogeneous nanoparticles: In situ formation of WS 2 facilitates sulfur redox in Li-S battery

Exploring High-Voltage Sulfate Cathodes for Low-Temperature Thermal Batteries

High‐Temperature Solid‐State Synthesis and Electrochemical Properties of Transition Metal Sulfides for Thermal Batteries

Failure Mechanism and Residual Stress Analysis of Crystal Materials for the Thermal Battery

Thermal Analysis and Modeling of Thermal Batteries with Lithium-Boron Alloy Anode and Cobalt Disulfide Cathode

Controllable synthesis of few-layer ammoniated 1T′-phase WS 2 as an anode material for lithium-ion batteries

Cobalt-Doped NiS 2 Micro/Nanostructures with Complete Solid Solubility as High-Performance Cathode Materials for Actual High-Specific-Energy Thermal Batteries

Enhanced catalytic conversion of polysulfides using high-percentage 1T-phase metallic WS2 nanosheets for Li–S batteries

Synthetic optimization and application of Li-argyrodite Li6PS5I in solid-state battery at different temperatures

Rational design of low interfacial resistance between NiS 2 cathode and electrolyte for high-performance Li thermal battery

Modulation of the Oxidation End‐Product Toward Polysulfides‐Free and Sustainable Lithium‐Pyrite Thermal Batteries

Regulating the d band in WS2@NC hierarchical nanospheres for efficient lithium polysulfide conversion in lithium-sulfur batteries

S/MWCNt/LLZO composite electrode with e−/S/Li+ conductive network for all-solid -state Lithium–Sulfur batteries