Abstract:Transition-metal sulfides are key cathode materials for thermal batteries used in military applications. However, it is still a big challenge to prepare sulfides with good electronic conductivity and thermal stability. Herein, we rapidly synthesized a Co-doped NiS2 micro/nanostructure using a hydrothermal method. We found that the specific capacity of the Ni1–xCoxS2 micro/nanostructure increases with the amount of Co doping. Under a current density of 100 mA cm–2, the specific capacity of Ni0.5Co0.5S2 was about 1565.2 As g–1 (434.8 mAh g–1) with a cutoff voltage of 1.5 V. Owing to the small polarization impedance (5 mΩ), the pulse voltage reaches about 1.74 V under a pulse current of 2.5 A cm–2, 30 ms. Additionally, the discharge mechanism was proposed by analyzing the discharge product according to the anionic redox chemistry. Furthermore, a 3.9 kg full thermal battery is assembled based on the synthesized Ni0.5Co0.5S2 cathode materials. Notably, the full thermal battery discharges at a current density of 100 mA cm–2, with an operating time of about 4000 s, enabling a high specific energy density of around 142.5 Wh kg–1. In summary, this work presents an effective cathode material for thermal battery with high specific energy and long operating life.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c13396?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c13396</a>.XRD patterns of synthetic products obtained at 180 or 200 °C at different heating times; XRD patterns with the corresponding Rietveld refinement of Ni1–xCoxS2 (x = 0.1–0.4), NiS, and CoS2; EDS patterns and the corresponding selected area of the as-prepared Ni1–xCoxS2 (x = 0.1–0.5); HRTEM image of Ni0.5Co0.5S2; and electrochemical performance of NiS and CoS2 (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c13396/suppl_file/am0c13396_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

High‐Temperature Solid‐State Synthesis and Electrochemical Properties of Transition Metal Sulfides for Thermal Batteries

Large-Scale Synthesis of High Energy Thermal Battery Cathode Ni 0.5 Co 0.5 S 2 by a Simple Sintering Technique

Scalable Preparation and Improved Discharge Properties of FeS2@CoS2 Cathode Materials for High-Temperature Thermal Battery

Cobalt-Doped NiS 2 Micro/Nanostructures with Complete Solid Solubility as High-Performance Cathode Materials for Actual High-Specific-Energy Thermal Batteries

Exploring High-Voltage Sulfate Cathodes for Low-Temperature Thermal Batteries

Development and Prospect of Oxide Cathode Materials for High Temperature Lithium Batteries

Enhanced electrochemical performance of NiS 2 cathode materials at elevated temperature by Cu doping

Synthesis and electrochemical performances of cathode material Fe0.5Co0.5S2 for thermal batteries by a facile molten salt method

Modulation of the Oxidation End‐Product Toward Polysulfides‐Free and Sustainable Lithium‐Pyrite Thermal Batteries

High-specific capacity thermal battery cathode Fe and Ni doped CoS 2 by enhanced thermal stability and conductivity

Preparation and electrochemical performance of FG/SnS 2 composite as a cathode material for high power thermal batteries

High Areal Capacity Cation and Anionic Redox Solid-State Batteries Enabled by Transition Metal Sulfide Conversion

Lithium Sulfide: Magnesothermal Synthesis and Battery Applications

Progress of transition metal sulfides used as lithium-ion battery anodes

Sulfide‐Based Solid‐State Electrolytes: Synthesis, Stability, and Potential for All‐Solid‐State Batteries

High-Performance Cathodes Prepared Via Liquid-Phase Method and Catalyzed by Co9S8 for All-Solid-State Lithium-Sulfur Batteries

Consolidating Lithiothermic-Ready Transition Metals for Li 2 S-Based Cathodes.

High‐Entropy Sulfides as Electrode Materials for Li‐Ion Batteries

Study on electrochemical performance of WS2 cathode material for thermal battery prepared by one-step synthesis

Synthetic optimization and application of Li-argyrodite Li6PS5I in solid-state battery at different temperatures

The Engineering Strategy in Fabrication and Application of High-Specific-Energy Cathode for Thermal Battery