Abstract:The performance of lithium-sulfur batteries is deteriorated by the inferior conductivity of sulfur, the shuttle effect of lithium polysulfides (LiPSs), sluggish redox kinetics of polysulfide intermediates and serious volumetric expansion of sulfur. To overcome these challenges, we report a versatile route to prepare multi-functional nanocomposites with tuable hierarchical structure via ammonium hydroxide (NH3·H2O) induced self-assembly. The versatility of the system has been demonstrated that the organization of the hierarchical structure can be regulated by adding different amount of NH3·H2O, and WS2 and Co9S8 with nitrogen-doped carbon coating (denoted as WS2@NC and Co9S8@NC) can be prepared by adding different precursor salts. When the as-prepared materials are applied for Li-S batteries, the WS2@NC composite exhibits a reversible capacity of 1107.4 mAh g−1 at 0.1 C after 500 cycles and even 728.9 mAh g−1 at 2 C for 1000 cycles, which is significantly better than the Co9S8 counterpart and other reported WS2 sulfur hosts. Experimentally, the advantageous performance of WS2 could be attributed to its higher surface area and total pore volume, giving rise to the easier access to electrolyte and better ability to buffer the volume change during the charge/discharge process. Theoretically, the density function theory (DFT) calculation reveals that the as-prepared WS2 has a higher binding energy towards LiPSs as well as a lower energy barrier for Li+ diffusion on the surface than Co9S8. More significantly, the density of states (DOS) analysis further confirms that the superior performance is mainly ascribed to the more prominent shifting and the more charge compensation from d band of W than Co, which increase electronic concentration and give more hybridization of d-p orbitals in the Fermi level of the adsorbed Li2S4 to accelerate the lithium polysulfide interfacial redox and conversion dynamics in WS2. By proposing this mechanism, this work sheds new light on the understanding of catalytic conversion of lithium polysulfides at the atomic level and the strategy to develop advanced cathode materials for high-performance lithium-sulfur batteries.

Revealing dynamic sulfidation of WC-WO 3 heterogeneous nanoparticles: In situ formation of WS 2 facilitates sulfur redox in Li-S battery

Enhanced catalysis LiS<sub>3</sub> of radical-to-polysulfide interconversion <i>via</i> increased sulfur vacancies in lithium-sulfur batteries

"Wane and wax" strategy: Enhanced evolution kinetics of liquid phase Li2S4 to Li2S via mutually embedded CNT sponge/Ni-porous carbon electrocatalysts

Boosting Redox Kinetics of Sulfur Electrochemistry by Manipulating Interfacial Charge Redistribution and Multiple Spatial Confinement in Mott–Schottky Electrocatalysts

WS 2 -TiO 2 Heterostructure Catalyst for Boosting the Polysulfide Adsorption–Conversion in Lithium–Sulfur Batteries

Ultradispersed WxC nanoparticles enable fast polysulfide interconversion for high-performance Li-S batteries

Regulating the d band in WS2@NC hierarchical nanospheres for efficient lithium polysulfide conversion in lithium-sulfur batteries

Design of WO 2.83 -WN Heterostructure Bidirectional Catalyst for High-Performance Lithium–Sulfur Batteries

Cooperative catalytic platinum species accelerating polysulfide redox reactions for Li-S batteries

Optimized Catalytic WS2–WO3 Heterostructure Design for Accelerated Polysulfide Conversion in Lithium–Sulfur Batteries

Unraveling the Atomic‐Level Manipulation Mechanism of Li2S Redox Kinetics via Electron‐Donor Doping for Designing High‐Volumetric‐Energy‐Density, Lean‐Electrolyte Lithium–Sulfur Batteries

A Porous Hexagonal Prism Shaped C-In2-XCoXO3 Electrocatalyst to Expedite Bidirectional Polysulfide Redox in Li-S Batteries

Promoting polysulfide conversions via cobalt single-atom catalyst for fast and durable lithium-sulfur batteries

Revealing the Sulfur Redox Paths in a Li–S Battery by an In Situ Hyphenated Technique of Electrochemistry and Mass Spectrometry

Self‐Supported Tungsten Nitride and Carbide Heterostructures with Vanadium Doping Tandemly Catalyze the Conversion of Polysulfides for Lithium‐Sulfur Batteries

Fast conversion and controlled deposition of lithium (poly)sulfides in lithium-sulfur batteries using high-loading cobalt single atoms

A Scalable Sulfuration of WS 2 to Improve Cyclability and Capability of Lithium-Ion Batteries

Oxygen Defect‐Rich WO3−x–W3N4 Mott–Schottky Heterojunctions Enabling Bidirectional Catalysis for Sulfur Cathode

Regulating the d band in WS<sub>2</sub>@NC hierarchical nanospheres for efficient lithium polysulfide conversion in lithium-sulfur batteries

Enhanced catalytic conversion of polysulfides using high-percentage 1T-phase metallic WS2 nanosheets for Li–S batteries

Platinum Electrocatalyst Promoting Redox Kinetics of Li2S and Regulating Li2S Nucleation for Lithium-Sulfur Batteries.