Abstract:Cryo-rolled aluminum alloys have a much higher strength-to-weight ratio than cold-rolled alloys, which makes them invaluable in the aerospace and automotive industries. However, this strength gain is frequently accompanied by a formability loss. When uniformly applied to the blank surface, hydroforming provides a solution by generating geometries with constant thickness, making it possible to produce complex structures with "near-net dimensions", which are difficult to achieve with conventional approaches. This study delves into the cavity die sheet hydroforming (CDSHF) process for high-strength cryo-rolled AA5083 aluminum alloy, focusing on two primary research questions. Firstly, we explored the utilization of a nonlinear 3D finite-element (FE) model to understand its impact on the dimensional accuracy of hydroformed components within the CDSHF process. Specifically, we investigated how decreasing fluid pressure and increasing the holding time of peak fluid pressure can be quantitatively assessed. Secondly, we delved into the optimization of process parameters—fluid pressure (FP), blank holding force (BHF), coefficient of friction (CoF), and flange radius (FR)—to achieve dimensional accuracy in hydroformed square cups through the CDSHF process. Our findings reveal that our efforts, such as reducing peak fluid pressure to 22 MPa, implementing a 30 s holding period, and utilizing an unloading path, enhanced component quality. We demonstrated this with a 35 mm deep square cup exhibiting a 16.1 mm corner radius and reduced material thinning to 5.5%. Leveraging a sophisticated nonlinear 3D FE model coupled with response surface methodology (RSM) and multi-objective optimization techniques, we systematically identified the optimal process configurations, accounting for parameter interactions. Our results underscore the quantitative efficacy of these optimization strategies, as the optimized RSM model closely aligns with finite-element (FE) simulation results, predicting a thinning percentage of 5.27 and a corner radius of 18.64 mm. Overall, our study provides valuable insights into enhancing dimensional accuracy and process optimization in CDSHF, with far-reaching implications for advancing metal-forming technologies.

Mathematical Modeling and Analysis of Hoop Stress in Hydroforming Deepdrawing of n-sided Polygonal Cup

Deformation Patterns in Hydroforming of Thin-Walled Y-Shaped Tube

Contribution to mathematical modeling of cup drawing: the upper-bound analysis for inward pull (case II) in ring forming

A 3D Non-Linear FE Model and Optimization of Cavity Die Sheet Hydroforming Process

Modeling material behavior of AA5083 aluminum alloy sheet using biaxial tensile tests and its application in numerical simulation of deep drawing

A Mathematical Model for Determination of Limiting Blank Holding Force and Cavity Pressure in Hydromechanical Deep Drawing

Die Structure Analysis Of Stress Distribution During High-Strength Steel Stamping Process And Experimental Validation

Structural analysis of plate-type hydroforming hydraulic press

Multi-scale numerical investigation of deep drawing of 6K21 aluminum alloy by crystal plasticity and a stress-invariant based anisotropic yield function under non-associated flow rule

Detailed experimental and numerical analysis of a cylindrical cup deep drawing: pros and cons of using solid-shell elements

Hybrid models for optimization of deep-drawn cups deploying scaling laws: a case study for sustainable development

Study on hydroforming of AA6061-T6 aluminum alloy sheet based on upper sheet

Construction of 6061-T6 aluminum alloy constitutive model based on hot bulging test and study on the non-isothermal hydroforming process

Analysis of Thickness Variation in 2219 Aluminum Alloy Ellipsoid Shell with Differential Thickness by Hydroforming

Process window calculation and pressure locus optimization in hydroforming of conical box with double concave cavities

Analytical Formulation to Predict Residual Stresses in Thick-Walled Cylinders Subjected to Hoop Winding, Shrink-Fit, and Conventional and Reverse Autofrettages

Analysis and Design of Hydroforming Process for Automobile Rear Axle Housing by Fem

Microstructural analysis of sheet hydroforming process assisted by radial ultrasonic punch vibration in a hydro-mechanical deep drawing die

Construction of aluminum alloy constitutive model based on BP neural network and the study of non-isothermal hydroforming

Anisotropic plasticity deformation during micro-deep drawing of 304 foils: An experimental and numerical investigation

Analysis and Design of Hydroforming Processes by the Rigid–plastic Finite Element Method