Abstract:In this research, the earing characteristics of 6K21 aluminum alloy in circular cup deep drawing are investigated by virtue of experiments and multi-scale simulations including anisotropic Drucker, Hill48, Yld91 yield functions and crystal plastic finite element model (CPFEM). First, the deep drawing experiments of AA 6K21 are carried out to explore the influences of blank holding force (BHF) and blank diameter (BD) on earing profile and mechanical response. The user-defined material model subroutine is written for LS-DYNA explicit code, including constitutive model and ductile fracture criterion under associated or non-associated flow rule (NAFR). The parameters of the crystal plasticity model are calibrated by means of an optimization algorithm. Three yield functions under NAFR and CPFEM are used to predict earing in deep drawing simulation. The effects of five textures on the earing profiles and thickness variables are studied by CPFEM. The results demonstrate that the earing rate decreases slightly as the BHF increases. However, the mechanical response changes insignificantly. Moreover, as the BD increases, both the earing rate and mechanical response increase significantly. Considering computation accuracy and efficiency, the anisotropic Drucker function can accurately character the plastic deformation behavior of deep drawing. For five textures in CPFEM, Cube and Goss textures produce four ears at 0o and 90o from the rolling direction. Brass and S textures form six ears at 0o and 55o . Copper texture fabricates eight ears at 40o and 70o . The influences of five textures on earing rate are Goss > Cube > Copper > Brass > S. Furthermore, there are obvious thickness gradient fluctuations at the corner of the cup in Cube, Goss and Copper textures. It is expected to reduce the earing rate and improve the formability through reasonable allocations of experimental parameters and texture proportions.

Contribution to mathematical modeling of cup drawing: the upper-bound analysis for inward pull (case II) in ring forming

Finite Element Simulation and Analysis of Deformation in Machining of Aeronautical Aluminum Alloy Thin-Walled Workpiece

Detailed experimental and numerical analysis of a cylindrical cup deep drawing: pros and cons of using solid-shell elements

A Mathematical Model for Determination of Limiting Blank Holding Force and Cavity Pressure in Hydromechanical Deep Drawing

Mathematical Modeling and Analysis of Hoop Stress in Hydroforming Deepdrawing of n-sided Polygonal Cup

A Study on Yield Criteria Influence on Anisotropic Behavior and Fracture Prediction in Deep Drawing SECC Steel Cylindrical Cups

Investigation on limited thickening ratio of upsetting with a controllable deformation zone

Modeling material behavior of AA5083 aluminum alloy sheet using biaxial tensile tests and its application in numerical simulation of deep drawing

A new method of solving plane-strain boundary value problems for the double slip and rotation model

Evaluation of the Effect of Contact and Friction on Deep Drawing Formability Analysis for Lightweight Aluminum Lithium Alloy Using Cylindrical Cup

Finite Element Simulation of a Multistage Square Cup Drawing Process for Relatively Thin Sheet Metal through a Conical Die

An analysis for three-dimensional upset forging of elliptical disks and rings based on the upper-bound method

Buckling Defect Optimization of Constrained Ring Rolling of Thin-Walled Conical Rings with Inner High Ribs Combining Response Surface Method with FEM

Theoretical Prediction of Flange Wrinkling in the First-Pass Conventional Spinning of Dual-Metal Sheets

Hybrid models for optimization of deep-drawn cups deploying scaling laws: a case study for sustainable development

A Novel Method for Friction Coefficient Calculation in Metal Sheet Forming of Axis-Symmetric Deep Drawing Parts

Novel finite element model of analyzing wall thickness during tube drawing considering raw tube's thickness non-uniformity and die misalignment

Finite Element Modeling for Deep-Drawing of Aluminum Alloy Sheet 6014-T4 Using Anisotropic Yield and Non-Afr Models

An analytical model for designing defect-free sheet metal profiles with height-variable cross sections manufactured by Flexible Roller Beading

Investigation of Interfacial Friction and Inverse Flowing Behavior under the Adhesive State

Multi-scale numerical investigation of deep drawing of 6K21 aluminum alloy by crystal plasticity and a stress-invariant based anisotropic yield function under non-associated flow rule