Abstract:To develop a high-precision constitutive model and hot processing map for 5A06 aluminum alloy , the hot deformation behavior of the alloy was investigated through isothermal compression experiments and microstructure analysis experiments, which were conducted at temperatures ranging from 573 K to 773 K and at strain rates ranging from 0.01 to 10 s −1 . Firstly, a new constitutive model, which is based on the partial derivatives of the experimental flow data and does not significantly increase the material parameters, was proposed. Secondly, a comparison and analysis of the predictive accuracies of both the new model and the classic model were conducted. Finally, the new constitutive model was used to construct the hot processing maps of the 5A06 aluminum alloy, and the optimal hot processing parameters were validated through metallographic experiments. The results show that a high-precision constitutive model can be constructed with a small number of material parameters by considering the second-order approximation between logarithmic stress and temperature, as well as the third-order approximation between logarithmic stress and logarithmic strain rate. The mean square errors of the new model were significantly lower than those of the Arrhenius model and Hense-Spittle model for all strain rates and temperatures. There were significant differences in the prediction accuracy of the AH and HS models at different temperatures and strain rates, indicating their accuracy was dependent on temperature and strain rate. The coefficients of the new model were significantly higher than those of the AH and HS models. Moreover, the proximity of predicted values to experimental values was ranked in descending order as follows: new model, AH model, and HS model. The energy dissipation rate is relatively high when the strain rate is lower than 10 s-1 and the temperature is higher than 623 K. The instability factor is larger than zero for all conditions except when the strain rate is equal to 10 s −1 . The optimal hot working temperature range for 5A06 aluminum alloy is 623–700 K, and the strain rate should be in the range of 0.01 s −1 to 1 s −1 . The microstructure analysis matches the predicted results from hot processing maps, which can guide the hot working process of 5A06 aluminum alloy.

Construction of 6061-T6 aluminum alloy constitutive model based on hot bulging test and study on the non-isothermal hydroforming process

Research on aluminum alloy sheet thermoplastic deformation behavior based upon warm bulging test

Modeling of constitutive behavior and ductile fracture of AA5A06 aluminum alloy sheet in warm hydroforming process

Study on hydroforming of AA6061-T6 aluminum alloy sheet based on upper sheet

Construction of aluminum alloy constitutive model based on BP neural network and the study of non-isothermal hydroforming

Evaluation of the formability of AA2198-T3 Al-Li alloy in warm sheet hydroforming

Modeling mechanical properties and plastic strain for hot forming-quenching AA6061 aluminum alloy parts

Effect of Strain State on the Surface Roughening for Hydroforming of Aluminum Alloy Tube Based on Cross-Scale Numerical Modeling

A Physical-Based Plane Stress Constitutive Model for High Strength AA7075 under Hot Forming Conditions

Constitutive model for hot deformation of aluminum alloy

Constitutive modeling of deformation in high temperature of a forging 6005A aluminum alloy

Constitutive Modeling of the Hot Deformation Behavior in 6082 Aluminum Alloy

Microstructure evolution, constitutive modeling and forming simulation of AA6063 aluminum alloy in hot deformation

A physical-based unified constitutive model of AA7075 for a novel hot forming condition with pre-cooling

Modified constitutive model and workability of 7055 aluminium alloy in hot plastic compression

A new constitutive model and hot processing map of 5A06 aluminum alloy based on high-temperature rheological behavior and higher-order gradients

Temperature rises and constitutive equation of homogenized 6063 aluminum alloy for extrusion

M–K model based forming limit prediction of aluminum–lithium alloy 2060 and its application in hot stamping

Comprehensive study of hot compression behaviors and microstructure evolution of solutionized 6082 aluminum alloy extruded bar

Study of Hot Deformation Behavior of 6082 Aluminum Alloy

Strength and Formability Improvement of Al-Cu-Mn Aluminum Alloy Complex Parts by Thermomechanical Treatment with Sheet Hydroforming