Development of silane-treated corn husk fiber and agro-waste biofiller-reinforced epoxy composite: effects on wear, mechanical, thermal, and water absorption properties
L. Narayanan,S. Muthukumaran
DOI: https://doi.org/10.1007/s13399-024-05837-2
IF: 4.05
2024-06-19
Biomass Conversion and Biorefinery
Abstract:The study developed an eco-friendly composite material using silane-treated coconut shell powder, areca nut powder, and corn husk fiber in epoxy. The principal aim of this research work is to develop an eco-friendly composite using biomass wastes. The fiber and filler were silane surface treated using 3-aminopropyltriethoxysilane and the composites were developed using hand layup method. The composites were further tested for load-bearing and tribological properties in accordance with ASTM standards. According to results, composite CHAE3 exhibited high tensile strength (88.88 MPa), flexural strength (175.89 MPa), impact energy (5.3 J), hardness (85.8 Shore-D), and fatigue resistance. CHAE5 showed high thermal stability (TG%, 94% at 384 °C), thermal conductivity (0.209 W/mK), water absorption (1.94%), CoF (0.28), and low wear loss (0.07 g). According to the ANOVA results, since p value < α , H 0 is rejected. Some of the groups' averages consider being not equal. In other words, the difference between the sample averages of some groups is big enough to be statistically significant. Enhanced performance of CHAE3 is attributed to optimized composition, effective filler dispersion, and enhanced interfacial bonding, revealed by SEM analysis, suggesting potential applications in automotive, construction, aerospace, defense, and sports.
energy & fuels,engineering, chemical