Abstract:Abstract: The main objective of in this the paper presents the investigation by kenaf fiber of silane usage of regarding silicon (IV) oxide on to using several mechanical tests similar to tensile strength, flexural and impact test are mechanical properties which helps to use in various industrial mechanical commercial applications. The kenaf fiber is soaked in a mixture of ethanol and silicon (IV) oxide which is known as treatment process and the non-hydrated kenaf fiber in untreated process. The plates are arranged to ASTM based on dimension in the form 3 ply’s of kenaf layer is inserted; It is molded with the help of epoxy resin. The composites there was fabricated using the hot press to form plate to Infusion in mixture process by the making of a compressed approximate orientation kenaf mat. The natural kenaf fiber as 50% vol with added of each plate in silicon (IV) oxide of 1%, 2%, and 2.5% there was used to make the hybrid composites. Then various test are flexural, tensile, micro hardness, impact and water absorption test, it is also based on treated and untreated values. These are some of the important stages on the followed in these procedures. Improving the impact of kenaf fiber on crack resistance, durability and mechanical properties in concrete applications. In this research, kenaf fiber is separate in treated and untreated composite materials. The mechanical fields which help to develop the efficiency of the experimental where the kenaf fibre material is being used. The main role of reason for the usage of thismaterial is to avoid plastics. Because of natural fibers are commonly weaker than to synthetic fibers, they tend to weaken mechanically and physically over period due to the porosity of the fibers. The final test performed known as tensile in breakage point to be SEM test, the test we can able to see the 200μ to 500μ range in micro image of this material. The composites with added of 2.5% vol nano silica show greatest mechanical methods of the samples treated with an silica nanoparticles at 264 Mpa and 6352 Mpa for flexural strength, flexural modulus. The effects presented that the adding of nano silica (IV) particles with kenaf fiber in general has a good effect on mechanical properties.

Influence of nano-silica on mechanical properties of Indian almond fiber reinforced hybrid epoxy composites

Influence of silica and alumina nanoparticles on the wear and mechanical behavior of Indian almond fiber reinforced natural composites

Behavior of epoxy resin filled with nano-SiO<sub>2</sub> treated with a Eugenol epoxy silane

Mechanical, Wear and Fatigue Behaviour of Neem Oil and Nanosilica Toughened Areca Fibre Reinforced Epoxy Resin Composite

Mechanical, Thermal Conductivity and Water Absorption of Hybrid Nano-Silica Coir Fiber Mat Reinforced Epoxy Resin Composites

Effect of Al2O3 and SiC Nano-Fillers on the Mechanical Properties of Carbon Fiber-Reinforced Epoxy Hybrid Composites

Visco-Elastic, Thermal, Antimicrobial and Dielectric Behaviour of Areca Fibre-Reinforced Nano-silica and Neem Oil-Toughened Epoxy Resin Bio Composite

Investigation and chemical processing effect of sisal fiber epoxy composite characteristic enhancement with nano-SiC via injection mold

Effect of palmyra sprout fiber and biosilica on mechanical, wear, thermal and hydrophobic behavior of epoxy resin composite

Investigation on the mechanical and moisture uptake properties of epoxy- Terminalia arjuna fiber natural composites containing nano-silica

Treated sisal fiber made epoxy composite hybridize with silicon carbide nanoparticles: Characteristics study

Influence of MXene, Graphene Nanoplatelet and Multi-Walled Carbon Nanotube on Mechanical Properties, Swelling and Flammability Behaviour of Hybrid Sisal/Glass Fibre Reinforced Epoxy Laminate Composites

Performance of Novel Engineered Materials from Epoxy Resin with Modified Epoxidized Natural Rubber and Nanocellulose or Nanosilica

Enhanced Mechanical and Thermal Properties in Epoxy-Based Glass Fabric Composites via Nano Silica Integration

Analysis of the Hybrid of Mudar/Snake Grass Fiber-Reinforced Epoxy with Nano-Silica Filler Composite for Structural Application

Effect of silane treatment on corn husk and tamarind fiber and betel nut filler on fatigue, thermal conductivity, and machining behavior of epoxy biocomposites

Antibacterial and dynamical behaviour of silicon nanoparticles influenced sustainable waste flax fibre-reinforced epoxy composite for biomedical application

Mechanical, Dielectric and Thermal Stability of Silicon Oxynitride Nanoparticle Dispersed Tamarind Fiber-Reinforced Epoxy Bio-composite

Low Velocity Impact and Mechanical Behaviour of Shot Blasted SiC Wire-Mesh and Silane-Treated Aloevera/Hemp/Flax-Reinforced SiC Whisker Modified Epoxy Resin Composites

Effect of Fibre Loading on Mechanical Behavior of Kenaf Fibre and Nano Silica Reinforced epoxy Resin Composite Material with and without Silane Treatment

Role of silica-based porous cellulose nanocrystals in improving water absorption and mechanical properties