Abstract:The precursors of the hydrotalcite (HT) and the Co-containing hydrotalcite-like compounds (HTLcs) using coprecipitation method and the mixed oxides of 2Mg/Al, Co/Mg/Al, 1.5Co/0.5Mg/Al and 2Co/Al using calcination of the precursors were prepared. Various measured methods, such as BET, XRD, TG-DTA, TPR, FT-IR, microcalorimetric adsorption and isopropanol catalytic reaction were used to study the physico-chemical properties of these samples. The results showed that the specific surface areas of the mixed oxides derived from the HT and HTLcs precursors are larger whereas decreased with the increase of the Co content in the sample. After the cobalt cations were introduced into the HT structure, due to the redox properties of the cobalt cations, the binding abilities of the HT layers attracted the interlayer anions were weakened, which thence enabled that the thermal decomposition temperature and the thermostability were descended, and after calcination, which resulted in the specific surface areas of the Co-containing mixed oxides are lower than that of the 2Mg/Al sample. In TPR process, the 2Mg/Al sample is not reduced, while the reduction of the Co-containing mixed oxide is via a path of Co3+ to Co2+ and then to Co-0. The surface of the mixed oxide was showed to contain the acidic sites and the basic sites, and with the change of the Co content in sample the acidic sites and the basic sites were gained some adjustments. The FT-IR indicated that on the surface of the Co-containing mixed oxide the Lewis acid sites were the main and the Bronsted acid sites were the less. The acetone selectivity of the isopropanol catalytic reaction was the highest, which indicated that the redox surface sites on these samples were in the dominant position. Due to the addition of Co and the enhancement of the Co content in these samples, the conversion of the isopropanol catalytic reaction was increased also.

Effect of Mg/Al molar ratio on the basicity of Mg-Al mixed oxide derived from Mg-Al hydrotalcite

Structure and Base Properties of Calcined Hydrotalcites

Synthesis and Surface Acid/Base Properties of Magnesium-Aluminum Mixed Oxides Obtained from Hydrotalcites

Structural and Surface Acid/Base Properties of Hydrotalcite-Derived MgAlO Oxides Calcined at Varying Temperatures

Exploration on influence of calcination temperature on structure and surface acidity and basicity of Mg(Al)O composite oxide

Synthesis and Characterization of the Mixed Mg/Al Hydrotalcite‐Like Compounds

Adsorption of Nitrate and Nitrite from Aqueous Solution Onto Calcined (mg–al) Hydrotalcite of Different Mg/Al Ratio

Synthesis of High-Crystallinity Mg-Al Hydrotalcite with a Nanoflake Morphology and Its Adsorption Properties for Cu2+ from an Aqueous Solution

Influence of Acid-Base Properties of ZnMgAl-mixed Oxides for the Synthesis of 1-Methoxy-2-propanol

Basic Properties of MgAl-Mixed Oxides in CO2 Adsorption at High Temperature

Effect of coprecipitation method on Mg–Al hydrotalcite properties: application in the synthesis of diethylene glycol di-(methyl carbonate)

Effect of Aluminum Incorporation on the Reaction Process and Reaction Products of Hydrated Magnesium Silicate

Effect of Mg Addition on the Structure and Performance of Sulfide Mo/Al2o3 in Hds and Hdn Reaction

Synthesis of Mg-Al Hydrotalcite Clay with High Adsorption Capacity

Influence of the Chemical Composition of MgAlFeCu Mixed Oxides As Catalysts for SO2Removal

Evaluation of Crystalline Structure and SO2 Removal Capacity of a Series of MgAlFeCu Mixed Oxides As Sulfur Transfer Catalysts

Synthesis, Characterization And Isopropanol Catalytic Reaction Of Mg/Al,Co/Al And Co/Mg/Al Mixed Oxides From Hydrotalcite And Hydrotalcite-Like Precursors

Microcalorimetric Studies of Surface Acid/Base Properties of Magnesium Iron Catalysts Prepared from Hydrotalcite-Type Precursors

Study of the Effects on Synthesis Mg-Al-hydrotalcite-like Compounds

Effect of BaO on Hydrogen Sorption Performance of Mg 17 Al 12 : Experimental and Theoretical Studies

The influence of Mg/Al molar ratio on the performance of CuMgAl-x catalysts for CO2 hydrogenation to methanol