Abstract:To develop in-depth understanding of metallurgical phenomena for completeness, mechanical heterogeneity is kinetically and thermodynamically explained by thorough microstructure characterization of engineering materials, e.g. polycrystalline nickel-based superalloy, for alleviation of weldability-related problems during laser-induced keyhole fabrication. Because of nonequilibrium solidification behavior inside weld pool, finer γ phase dendrite substructure is confined to partition-resistant keyhole bottom part, coarser dendrite is crystallography-independently circumscribed at partition-vulnerable neck transition region of full penetration weld, and thus microstructure is lack of homogeneity. Abundance of segregation-driven eutectic phase or intermetallic phase in the interdendrite area throughout weld is essentially attributable to nonequilibrium solidification conditions, and morphologically increases susceptibility to mechanical properties deterioration. As a result of γ phase instability, Niobium-aided Laves/γ eutectic reaction in the vicinity of dendrite interstices at terminal stage of solidification contributes to severe dendrite boundaries brittleness, impairs mechanical properties, which is consistent with metallography and fractography results, and is more deleterious to weldability, since solute redistribution and supersaturation adversely exacerbate segregation behavior in the residual interdendrite liquid, especially asymmetric weld pool shape. There is inverse parabolic relationship between secondary dendrite arm spacing and solute partition coefficient, when location varies from nail-shaped weld upper site to bottom site. Chemical, microstructural and mechanical heterogeneities are more geometrically favorable in the curvature-related neck transition region. In addition, the mechanism of thermal, metallurgical and mechanical inhomogeneities, which are attributed to asymmetric weld pool shape, is consequently proposed. Untoward metallurgical phenomena, such as microstructure heterogeneity and brittle Niobium-rich Laves/γ eutectic phases mitigate strength, ductility and toughness of weld. In order to macroscopically and microscopically satisfy superior mechanical properties requirement, chemistry and microstructure of high quality weld are metallurgically controlled. Fruitful metallurgical information and mechanical data further support the reasonable explanations. It is imperative to progressively advance welding metallurgy, weldability and fabricability of intricate shape for welding defects minimization, suppress segregation and further develop mechanical properties through viable design and control of laser processing, simultaneously.

Effect of the temperature gradient on hot cracking susceptibility for electron beam welding Alloy 247 LC

Hot Cracking of Resistance Spot Welded Magnesium Alloy

Alternatives to Reduce Hot Cracking Susceptibility of IN718 Casting Alloy Laser Beam Welds with a Mushroom Shape

Welding hot cracking characteristics and fracture mechanisms of nickel‐based alloy NS1402 under different constraint conditions

Influence of cold metal transfer welding parameters on the welding hot crack of Mar-M247 nickel-based superalloy

Diffusion-limited Nonequilibrium Phase Transformation of Nickel/Aluminum Dissimilar Materials during Laser Welding Part I: Precipitation-strengthened Polycrystalline Nickel-based Superalloy

Thermal stability of electron beam welded AlCoCrFeNi 2.1 alloy

Research on hot cracking in laser welding of Al-contaminated CoCrFeMnNi high-entropy alloys

Creep behavior and in-depth microstructural characterization of dissimilar joints

Microstructure and Properties of 3D-GH3625 Electron beam welded

Stray grain formation, thermomechanical stress and solidification cracking in single crystal nickel base superalloy welds

On fatigue crack path deviation at elevated temperature in electron beam repaired weldments of turbine disk

Effect of texture evolution and defect on the crack initiation of a Ni‐based superalloy electron beam welded joint

Thermal, Metallurgical and Mechanical Determinants of Laminar Nickel/Aluminum Dissimilar Alloys during Laser-material Interaction Part I: Nickel-based Superalloy

Laser Preheating for Hot Crack Reduction in Direct Metal Deposition of Inconel 738LC

High temperature damage development in Ni-alloy/steel dissimilar metal welds

Influence of solidification on the microstructural evolution of nickel base weld metal

Analysis on the Microfissuring Behavior in the Heat-affected Zone of Electron-beam Welded Nickel-based Superalloy

Influence of Hot Isostatic Pressing on Different Crack Modes of Laser Powder Bed Fusion-Processed CM247LC: Alternative Process Parameters Considering Post-processing

Effect of heat input on microstructure and mechanical properties of IC10 Ni3Al-based superalloy electron beam welding joint

Effect of heat input on microstructure and mechanical properties of laser welded joint of Inconel 617 nickel-based superalloy