Abstract:Micropump is the core component of the microfluidic systems. However, most mechanical micropumps are using the traditional contact bearings that are troubled by wear-out failure. Hydraulic levitation, which can make the rotating components levitate without any solid-solid contact, provides efficient solution to this long-standing challenge. Nevertheless, the current hydraulic levitation technology must utilize micron microgroove structure to produce thrust forces, therefore enlarging the assemble difficulty and manufacture cost. Alternatively, a novel kind of hydro-electromagnetic levitation micropump (HELP) without grooved thrust bearing is designed in this study. Taking advantage of the coupling behavior between the electromagnetic force and hydraulic force, the rotor of the HELP can levitate in the working fluid in all directions. Thereafter, the mechanisms of levitation forces formation are elucidated by the simulations of fluid flow and motor. Results indicate that the levitation bearing can provide sufficient load capacity in all working conditions, especially in high speeds. Based on the hydro-electromagnetic levitation principle, the HELP prototype is manufactured, whose overall size is as large as a coin, but can output the hydraulic performance of over 3160ml/min and 90.5 kPa at 20000 RPM, which is several times over other micropumps. To verify the rotor levitation performance, the levitation trajectory test benches are built on the basis of laser displacement sensors. Results prove that the designed HELP can levitate stably in all directions at all rotational speeds. The proposed levitation micropump may be an excellent choice for powering the liquid cooling systems with high performance and high reliability.

A new type of magnetic pump with coupled mechanical vibration and electromagnetic force

A Double-Rotating Ferrofluid Vane Micropump with an Embedded Fixed Magnet

A magnetically levitated centrifugal blood pump with a simple-structured disposable pump head.

Design and Research of Ferromagnetic Fluid Micropump with Double Rotating Magnetic Sources

Axial Active-Passive Suspension Electromagnetic System in Radial Air Gap for the Maglev Pump.

A 3D Miniaturized Glass Magnetic-Active Centrifugal Micropump Fabricated by SLE Process and Laser Welding

Manipulating Fluid with Vibrating 3D-Printed Paddles for Applications in Micropump

A Dual-Parallel Chamber Electromagnetic Micropump Fabricated Using 3D Printing Method from a Novel Magnetic Nanocomposite Material

Numerical and Experimental Research on the Hydro-Electromagnetic Levitation Micropump

Development and Application of a Diaphragm Micro-Pump with Piezoelectric Device

Parallel Valveless Micropump with Two Flexible Diaphragms

Design and Fabrication Process of Electromagnetically Actuated Valveless Micropump with Two Parallel Flexible Diaphragms

High-Efficiency 3D-Printed Three-Chamber Electromagnetic Peristaltic Micropump

Rotary pump using underwater electrical discharge

A Digital Miniature Pump for Medical Applications

Research on the Feasibility of a Magnetic-coupling-driven Axial Flow Blood Pump

Manipulate microfluid with an integrated butterfly valve for micropump application

A high current density DC magnetohydrodynamic (MHD) micropump

Integratable magnetic shape memory micropump for high-pressure, precision microfluidic applications

A Peristaltic Micro Pump Driven by a Rotating Motor with Magnetically Attracted Steel Balls

A System for Fluid Pumping by Liquid Metal Multi-Droplets.