Abstract:In recent years, organ chips have become an ideal alternative for physiological and pathological studies as well as drug screening. To more realistically simulate the in vivo physiological environment, micropumps are often needed as power sources to achieve dynamic culture in organ chips. In this study, we present a valveless electromagnetic micropump that can be used in organ chips. Fluid flow is actuated by the vibration of a PDMS membrane through a varying magnetic field. This micropump uses a nozzle/diffuser structure instead of valves, which simplifies the structure. By reducing the volume of the coil and magnet, the size of the electromagnetic micropump is minimized so that it can be integrated on a microfluidic chip. The micropump and the chip can be portably packaged by using a small signal generation module and a dry battery to supply the coil with a square wave, reducing the dependence on external devices. In addition, multiple electromagnetic micropumps can be integrated on a single chip. These micropumps can be connected in series or in parallel, which can achieve complicated flow conditions and can simulate physiological fluid flow more realistically in different types of organ chips. The flow rate was measured to characterize the actuating performance of the micropump. We established the dynamic coculture of a liver and breast cancer model on the chip, with medium actuated by the electromagnetic micropump. Cell viability, albumin and IL-6 were analyzed. The results indicated that dynamic coculture, which was actuated by the electromagnetic micropump, was beneficial for cell growth and function compared with the static control group. (C) 2019 Elsevier B.V. All rights reserved.

A Peristaltic Micro Pump Driven by a Rotating Motor with Magnetically Attracted Steel Balls

Research and Fabrication of a Low-Cost Valveless Micropump Based on Piezoelectric Actuation

Experimental Study on a Small Flux, High Pressure Peristaltic Micropump

Low voltage driven miniaturized pump with high backpressure

A 3D Miniaturized Glass Magnetic-Active Centrifugal Micropump Fabricated by SLE Process and Laser Welding

Development of a peristaltic micropump for bio-medical applications based on mini LIPCA

Portable Valve-less Peristaltic Micro-pump Design and Fabrication

A valve-less microfluidic peristaltic pumping method.

On-chip Fast Mixing by a Rotary Peristaltic Micropump with a Single Structural Layer

A Double-Rotating Ferrofluid Vane Micropump with an Embedded Fixed Magnet

A metallic micropump for high-pressure microfluidics

A self-priming microfluidic diaphragm pump capable of recirculation fabricated by combining soft lithography and traditional machining

Design and Research of Ferromagnetic Fluid Micropump with Double Rotating Magnetic Sources

Hand-powered microfluidics: A membrane pump with a patient-to-chip syringe interface

A Pzt-Driven Micropump

Acoustic Atomization-Induced Pumping Based on a Vibrating Sharp-Tip Capillary

A self-priming, roller-free, miniature, peristaltic pump operable with a single, reciprocating actuator

A Dual-Parallel Chamber Electromagnetic Micropump Fabricated Using 3D Printing Method from a Novel Magnetic Nanocomposite Material

Magnetorheological elastomer peristaltic pump capable of flow and viscosity control

Chip-integrated non-mechanical microfluidic pump driven by electrowetting on dielectrics

A Minimized Valveless Electromagnetic Micropump for Microfluidic Actuation on Organ Chips