Abstract:A miniaturized pump to manipulate liquid flow in microchannels is the key component of microfluidic devices. Many researchers have demonstrated active microfluidic pumps, but most of them still required additional large peripherals to operate their micropumps. In addition, those micropumps were made of polymer materials so that their application may be limited to a variety of fields that require harsh conditions at high pressures and temperatures or organic solvents and acid/base. In this work, we present a 3D miniaturized magnetic-driven glass centrifugal pump for microfluidic devices. The pump consists of a volute structure and a 3D impeller integrated with two magnet disks of Φ1 mm. The 3D pump structure was 13 mm × 10.5 mm × 3 mm, and it was monolithically fabricated in a fused silica sheet by selective laser-induced etching (SLE) technology using a femtosecond laser. The pump operation requires only one motor rotating two magnets. It was Φ42 mm × 54 mm and powered by a battery. To align the shaft of the motor to the center of the 3D glass pump chip, a housing containing the motor and the chip was fabricated, and the overall size of the proposed micropump device was 95 mm × 70 mm × 75 mm. Compared with other miniaturized pumps, ours was more compact and portable. The output pressure of the fabricated micropump was between 215 Pa and 3104 Pa, and the volumetric flow rate range was 0.55 mL/min and 7.88 mL/min. The relationship between the motor RPM and the impeller RPM was analyzed, and the flow rate was able to be controlled by the RPM. With its portability, the proposed pump can be applied to produce an integrated and portable microfluidic device for point-of-care analysis.

A Dual-Parallel Chamber Electromagnetic Micropump Fabricated Using 3D Printing Method from a Novel Magnetic Nanocomposite Material

Research and Fabrication of a Low-Cost Valveless Micropump Based on Piezoelectric Actuation

High-Efficiency 3D-Printed Three-Chamber Electromagnetic Peristaltic Micropump

Design and Fabrication Process of Electromagnetically Actuated Valveless Micropump with Two Parallel Flexible Diaphragms

Parallel Valveless Micropump with Two Flexible Diaphragms

Design, Fabrication, and Characterization of A Valveless Magnetic Travelling-Wave Micropump

A 3D Miniaturized Glass Magnetic-Active Centrifugal Micropump Fabricated by SLE Process and Laser Welding

High Performance Electromagnetic Micropump with Bio-Inspired Synchronous Valves for Integrated Microfluidics

A 3D printed acoustofluidic nozzle-diffuser microfluidic pump

Design and Fabrication of Valveless Piezoelectric Micropump in Parallel with Double Chambers Based on MEMS Technology

Design and Research of the One-Way Microsphere Valve and the PDMS Film Electromagnetic Micropump

A metallic micropump for high-pressure microfluidics

Characterization of a 3D Printed Self-Powered Micropump Mould for Microfluidics Application

An Electromagnetically Actuated Tube Type Micropump with a One-Way Valve

Design and Research of Ferromagnetic Fluid Micropump with Double Rotating Magnetic Sources

A self-priming microfluidic diaphragm pump capable of recirculation fabricated by combining soft lithography and traditional machining

A Mems-Based Impedance Pump Based On A Magnetic Diaphragm

Manipulating Fluid with Vibrating 3D-Printed Paddles for Applications in Micropump

Development of a peristaltic micropump for bio-medical applications based on mini LIPCA

Design, Fabrication and Characterization of A Mechanical Micropump

Travelling Wave Magnetic Valveless Micropump Driven by Rotating Integrated Magnetic Arrays