Abstract:Vibrations in rotating machinery cause many problems such as excessive noise and the vibration transmission to the supporting structure. In addition, the vibration isolation of the machinery with a wide range of rotational speed is a vital requirement and different to realize in practical engineering. As one of the key components in rotating machinery, bearing is not only the major vibration excitation source, but also the main vibration transmission path. Therefore, the mechanical property of the bearing has a significant effect on the vibration of the rotating machinery. Compared with traditional mechanical bearing, the equivalent stiffness and damping of magnetic bearing can be changed by adjusting its control parameters. On this basis, a novel design strategy of parameters switched magnetic bearing and high static low dynamic stiffness (HSLDS) supports for the vibration isolation of rotating machinery is proposed in this article. The design changes the equivalent linear stiffness and damping of the magnetic bearing by adjusting the control parameters according to the rotor speed, which will improve the vibration isolation capability of magnetic bearing at different rotor speed. Meanwhile, to further reduce the vibration transmission, the rotating machinery was suspended by nonlinear isolator with high static low dynamic stiffness characteristic. As an example, a rotating machinery system consisting of a rigid rotor supported by parameters switched magnetic bearings and high static low dynamic stiffness supports is studied. In this model, the rotor is excited by the unbalance force with different rotational speed. The amplitude of force acted on the base and the maximum relative displacement between the journal and the bearing are used to judge the isolation performance. Simulation results show that the demonstrated the effectiveness of this design strategy and the force transmission is significantly reduced with a wide rotational speed range.

Vibration Isolation Optimized Design of Magnetic Suspended Pump

Matching Design of Active Magnetic Bearing and Elastic Support Vibration Isolator

Axial Active-Passive Suspension Electromagnetic System in Radial Air Gap for the Maglev Pump.

Multi-Objective Optimal Design of Μ–controller for Active Magnetic Bearing in High-Speed Motor

Low Vibration and Noise Design of Integrated Permanent Magnet Synchronous Motor (PMSM)

Vibration Control Of A Turbo Molecular Pump Suspended By Active Magnetic Bearings

Vibration Suppression of Base-Excited Rotors Supported by Active Magnetic Bearings Based on an Augmented Kalman Compensator

Vibration Control of Base-Excited Rotors Supported by Active Magnetic Bearing Using a Model-Based Compensation Method

Vibration Isolation of Rotating Machinery by Parameters Switched Magnetic Bearing and High Static Low Dynamic Stiffness Supports

Study on Inverter-fed Three-pole Active Magnetic Bearing

Finite Element Analysis of the Rotor System of a Magnetically Suspended Compound Molecule Pump

Vibration Suppressing with Mixed Weight for Multi-Targets in Active Magnetic Bearing-Flexible Rotor System

Axial Active-Passive Suspension Electromagnetic System in Radial Air Gap for Maglev Pump

Vibration Suppression for Magnetically Levitated High-Speed Motors Based on Polarity Switching Tracking Filter and Disturbance Observer

Unbalance Compensation for Active Magnetic Bearing Rotor System Using a Variable Step Size Real-Time Iterative Seeking Algorithm.

Synchronous Vibration Control for Magnetically Suspended Rotor System Using a Variable Angle Compensation Algorithm.

Non-contact Rotor Vibration Velocity Sensor and Its Application to Vibration Control of a Flexible Rotor on Active Magnetic Bearings

Vibration Damping of Magnetic Bearing Turbo Molecular Pump

Dynamic Stiffness Analysis and Experimental Verification of Axial Magnetic Bearing Based on Air Gap Flux Variation in Magnetically Suspended Molecular Pump

Integrated topology optimization for vibration suppression in a vertical pump

Parallel Vibration Isolation Platform Using Magnetorheological Technology