Abstract:Magnesium and its alloys are promising candidate materials for medical implants because they possess excellent biocompatibility and mechanical properties comparable to bone. Furthermore, secondary surgical operations for removal could be eliminated due to magnesium's biodegradability. However, magnesium's degradation rate in aqueous environments is too high for most applications. It has been reported that hydrophobic textured surfaces can trap a surface gas layer which acts as a protective barrier against corrosion. However, prior studies have not investigated separately the role of the texture and hydrophobic treatments on magnesium corrosion rates. In this study, pillar-shaped microstructure patterns were fabricated on polished high purity magnesium surfaces by ablation with a picosecond laser. Some micropatterned samples were further processed by stearic acid modification (SAM). Micropatterned surfaces with SAM had hydrophobic properties with water droplet contact angles greater than 130°, while the micropatterned surfaces without SAM remained hydrophilic. The corrosion properties of textured and smooth magnesium surfaces in saline solution were investigated using electrochemical impedance spectroscopy (EIS) and optical microscopy. Corrosion rates on both hydrophobic and hydrophilic laser machined surfaces were reduced ∼90% relative to polished surfaces. Surprisingly, corrosion rates were similar for both hydrophobic and hydrophilic surfaces. Indirect evidence of local alkalization near microstructures was found and was hypothesized to stabilize the Mg(OH)2 layer, thereby inhibiting corrosion on hydrophilic surfaces. This is different than the corrosion resistance mechanism for superhydrophobic surfaces which makes use of gas adhesion at the liquid solid interface. These results suggest additional processing to render the magnesium hydrophobic is not necessary since it does not significantly enhance the corrosion resistance beyond what is conferred by micropatterned textures.

Pure magnesium laser surface modification using Nd:YAG laser

Comparing Medium Pressure Dielectric Barrier Discharge (DBD) Plasmas and Classic Methods of Surface Cleaning/activation of Pure Mg for Biomedical Applications

Nanosecond, picosecond and femtosecond laser surface treatment of magnesium alloy: role of pulse length

Progress of laser surface treatment on magnesium alloy

Laser machined micropatterns as corrosion protection of both hydrophobic and hydrophilic magnesium

Enhancing Magnesium Bioactivity for Biomedical Applications: Effects of Laser Texturing and Sandblasting on Surface Properties

Corrosion Behaviour of Laser Powder Bed Fused Bulk Pure Magnesium in Hank's Solution

Microstructure and corrosion behavior of laser surface-treated AZ31B Mg bio-implant material

Laser Surface Modification of Rare Earth Containing Magnesium Alloy Through Simulated Body Fluid and Its Impact on Cell Viability

Surface modification of biomedical Mg-Ca and Mg-Zn-Ca alloys using selective laser melting: Corrosion behaviour, microhardness and biocompatibility

Laser-Guided Corrosion Control: A New Approach to Tailor the Degradation of Mg-Alloys.

The influence of laser fluences on surface properties, plasma formation, and microhardness of Mg-alloy

Laser printed amorphous magnesium alloy: Microstructure, mechanical properties and degradation behavior

Surface engineering of pure magnesium in medical implant applications

The effect of micro/nanostructures formed by laser ablation on the superhydrophobicity of AZ31B magnesium alloy

Combined anodizing and picosecond laser treatment to control the corrosion rate of biodegradable magnesium alloy AZ31

Optimization of biocompatibility in a laser surface treated Mg-AZ31B alloy

Influence of Mg Content on Microstructure Coarsening, Molten Pool Size, and Hardness of Laser Remelted Al(- x)-Mg-Sc Alloys

Study on Hydrophobic Surface of Magnesium Alloy Prepared by Femtosecond Laser and its Corrosion Resistance

Improved corrosion behavior of high-purity Mg surface modified by laser scanning and polycaprolactone spin coating

Refined Microstructure and Enhanced Anticorrosion Properties of Mg–4Y–3Nd–0.5Zr Alloy Fabricated by Laser Surface Remelting