Abstract:Powder bed fusion – laser beam (PBF-LB) of Mg alloys provides new possibilities for the production of complex structures with optimized designs, both for weight reduction in aerospace applications, as well as for patient-specific implants in orthopedic applications. However, even though numerous studies have been carried out on the topic, the influence of the individual PBF-LB process parameters on the microstructure and resulting material properties of Mg alloys remains ambiguous. Thus, this study aims to investigate the influence of laser power on the surface roughness, microstructure and resulting key material properties, namely corrosion resistance and mechanical performance. Samples were produced by PBF-LB from gas atomized Mg-4%Y-3%Nd-0.5%Zr (WE43) alloy powder, using three different laser powers: 60 W, 80 W, and 90 W. Contrary to expectation, the 90 W samples exhibited the highest degradation rate, while 60 W samples had the lowest, despite the latter having highest surface roughness and large internal pores. The higher degradation rate for the 90 W samples was instead found to stem from the near-surface microstructure. The higher energy input and subsequently reduced grain size, resulted in an increased amount of second phase precipitates than for the 60 W samples, thereby increasing the tendency for pitting via microgalvanic corrosion. For the tensile strength and elongation at break, the opposite trend was observed. Here, a reduction in grain size and an increase in precipitates for the 90 W samples were found to be beneficial. In conclusion, a definite influence of laser power on the formation of microstructure was observed, ultimately impacting the resulting corrosion and tensile properties of WE43. Future work should investigate the influence of other PBF-LB process parameters, with the aim of establishing an optimum balance between corrosion resistance and mechanical properties.

Corrosion Behaviour of Laser Powder Bed Fused Bulk Pure Magnesium in Hank's Solution

Study on Corrosion Characteristics and Mechanism of Laser Powder Bed Fusion of Mg-Zn-Zr Alloy

Effect of Aluminium Content and Processing Parameters on the Microstructure and Mechanical Properties of Laser Powder-Bed Fused Magnesium-Aluminium (0, 3, 6, 9wt%) Powder Mixture

Laser Powder Bed Fusion of Biodegradable Magnesium Alloys: Process, Microstructure and Properties

Effective Control of Microstructure Evolution in AZ91D Magnesium Alloy by SiC Nanoparticles in Laser Powder-Bed Fusion

Superstrengthening Effect of Beyond-Solid-Solution Laser Powder Bed Fused We43 Magnesium Alloy Triggered by Direct Aging Treatment

Higher laser power improves strength but reduces corrosion resistance of Mg WE43 processed by powder bed fusion

Effect of Powder Composition on WE43 Magnesium Alloy Fabricated by Laser Powder Bed Fusion

Progress of laser surface treatment on magnesium alloy

Research Progress on Laser Powder Bed Fusion Additive Manufacturing of Zinc Alloys

Anisotropic response in corrosion behavior of laser powder bed fusion Al-Mn-Mg-Sc-Zr alloy

Laser printed amorphous magnesium alloy: Microstructure, mechanical properties and degradation behavior

Influence of heat treatment on microstructure, mechanical and corrosion behavior of WE43 alloy fabricated by laser-beam powder bed fusion

Investigation on mechanical properties and corrosion behavior of laser powder bed fusion 70/30 copper-nickel alloy

Amorphous magnesium alloy with high corrosion resistance fabricated by laser powder bed fusion

Electrochemical Behavior of Laser Powder Bed Fusion (L-PBF) Ti–6Al–4V Alloy: Influence of Phase and Grain Boundaries on Surface Passive Film Formation

Metastable pitting corrosion behavior of laser powder bed fusion produced Ti-6Al-4V in Hank’s solution

Improving corrosion resistance of additively manufactured WE43 magnesium alloy by high temperature oxidation for biodegradable applications

Mechanical behavior and microstructure evolution of Al-Cu-Mg alloy produced by laser powder bed fusion: Effect of heat treatment

Laser Powder Bed Fusion of 316L Stainless Steel: Effect of Laser Polishing on the Surface Morphology and Corrosion Behavior

Effect of heat treatment and electroless Ni-P coating on mechanical property and corrosion behaviour of 316L stainless steel fabricated by laser powder bed fusion