Abstract:Space double-layer cylindrical reticulated shells (SDLCRS) have undergone rapid development in the four three decades. Significantly different from conventional multistory high-rise structures, such structures are very sensitive to vertical actions. As a result, conventional seismic isolation techniques that aim to reduce horizontal seismic actions are notably insufficient for this kind of structure. In this study, a new three-dimensional seismic isolation bearing was developed that can simultaneously reduce the horizontal and vertical seismic responses of an SDLCRS. To examine the actual seismic isolation effectiveness of the three-dimensional seismic isolation bearing and provide important theoretical, technical and experimental support for practical engineering applications, comparative shaking table tests were performed on isolated and non-isolated SDLCRSs with lower supporting structures. The 2013 Lsf ground motion record during Lushan earthquake and the 1954 Taft ground motion record were selected as seismic inputs. The dynamic responses including acceleration, displacement and strain of the SDLCRS under the input ground motions with different amplitudes were obtained using the shaking table tests. In addition, the seismic damage of the isolated and non-isolated structures was examined to determine the acceleration amplification effect of the structures. The effectiveness in acceleration and strain responses demonstrated that the three-dimensional seismic isolation bearing was very useful for horizontal and vertical seismic isolation. Moreover, the maximum displacement responses of the bearing were less than half of the respective design displacements, suggesting that the bearing still had considerable reserve bearing capacity and could significantly improve the safety of an SDLCRS under seismic loads. The bearing developed in this study not only has excellent seismic isolation performance and post earthquake restoration capability but can also be easily installed and maintained. Thus, this bearing holds great promise for engineering applications and is suitable for SDLCRS that require both horizontal and vertical seismic isolation.

Large-scale experimental investigation of a low-cost PVC ‘sand-wich’ (PVC-s) seismic isolation for developing countries

Does seismic isolation reduce the seismic vulnerability and the variability of the inelastic seismic response? Large-scale experimental investigation

Hybrid geotechnical and structural seismic isolation: Shake table tests

Rubber-sand infilled soilbags as seismic isolation cushions: experimental validation

Definition and Validation of Fast Design Procedures for Seismic Isolation Systems

Development of novel low-cost isolator UMELI (unbonded mesh elastomeric layered isolator): experimental investigations

Shaking table experiments on framed structure resting on geogrid reinforced geotechnical seismic isolation system

Base Isolation for Seismic Retrofitting of a Multiple Building Structure: Design, Construction, and Assessment

Experimental study on a geosynthetics isolator for the base vibration isolation of buildings neighboring metro transportation

Seismic Performance of Multi Story Building with Different Base Isolators

Geotechnical Seismic Isolation System Based on Rubber-Sand Mixtures for Rural Residence Buildings: Shaking Table Test

Experimental Parametric Study and Phenomenological Modeling of a Deformable Rolling Seismic Isolator

Experimental study on the sandbag isolator of buildings for subway-induced vertical vibration and secondary air-borne noise

Experimental research and numerical simulation of a large-span isolated structure considering multi-dimensional input effects

A biomimetic sliding–stretching approach to seismic isolation

Shaking table and pseudodynamic tests for the evaluation of the seismic performance of base-isolated structures

Seismic Isolation Layout Optimized of Mid-Rise Reinforced Concrete Building Frame Structure

To Investigate Different Parameters of Economic Sliding Based Seismic Isolation System

Centrifuge and theoretical study of the seismic response of anchored steel sheet pile walls in dry sand

Seismic analysis and performance of semi-active spring for base-isolated structures

Shaking table test of space double-layer cylindrical reticulated shell with three-dimensional isolation bearing