Abstract:<p>Owing to reliability and high strength-to-weight ratio, large thin-walled components are widely used in the aviation and aerospace industry. Due to the complex features and sequence involved in the machining process of large thin-walled components, machining deformation of component is easy to exceed the specification. In order to address the problem, it is important to retain the appropriate finishing allowance. To find the overall machining deformation, finishing allowance - induced deformation (web finishing allowance, sidewall finishing allowance) and initial residual stress - induced deformation were considered as major factors. Meanwhile, machined surface residual stress - induced deformation, clamping stress -induced deformation, thermal deformation, gravity-induced deformation and inertial force-induced deformation were neglected in the optimization model. Six-peak Gaussian function was introduced to fit the initial residual stress. Based upon the obtained function of initial residual stress, a deformation prediction model between initial residual stress and finishing allowance was established to attain the finishing allowance-induced deformation. In addition, linear programming optimization model based on the simplex algorithm was developed to optimize the overall machining deformation. Results have concluded that the overall machining deformation reached the minimum value when sidewall finishing allowance and web finishing allowance varied between 1-2 mm. Additionally, web finishing allowance - induced deformation and sidewall finishing allowance - induced deformation were 1.05 mm and 0.7 mm. Furthermore, the machining deformation decreased to 0.3-0.38 mm with the application of optimized finishing allowance allocation strategy, which made 39 %-56 % reduction of the overall machining deformation compared to that in conventional method.</p>

A semi-analytical model for predicting the machining deformation of thin-walled parts considering machining-induced and blank initial residual stress

Investigation on influences of initial residual stress on thin-walled part machining deformation based on a semi-analytical model

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

Finite Element Simulation and Analysis of Deformation in Machining of Aeronautical Aluminum Alloy Thin-Walled Workpiece

Numerical Simulation and Analysis of Symmetry and Step-symmetry Milling of Aerospace Thin-walled Workpiece

Machining Distortion Prediction of Aerospace Monolithic Components

Study on Machining Deformation of Aircraft Monolithic Component by FEM and Experiment

A general model for prediction of deformation from initial residual stress

Prediction Model for the Evolution of Residual Stresses and Machining Deformation of Uneven Milling Plate Blanks

Surface Topography Prediction Model in Milling of Thin-Walled Parts Considering Machining Deformation

Analysis and Simulation of Machining Deformation Resulting from Residual Stress

A prediction model for the milling of thin-wall parts considering thermal-mechanical coupling and tool wear

Numerical Simulation Investigation on Machining Deformation of Aviation Thin-Walled Parts Caused by Residual Stress

Machining deformation of single-sided component based on finishing allowance optimization

Machining deformation prediction for frame components considering multifactor coupling effects

602 FEM-based Simulation for Workpiece Deformation in Thin-Wall Milling

Adaptive Optimization Method for Prediction and Compensation of Thin-Walled Parts Machining Deformation Based on On-Machine Measurement

Modeling of Machining Distortion for Thin-Walled Components Based on the Internal Stress Field Evolution

The Role of Material Model in the Finite Element Simulation of High-Speed Machining of Ti6Al4V

An Initial Residual Stress Inference Method by Incorporating Monitoring Data and Mechanism Model

Machining-induced residual stress and deformation during Mg–Li alloy thin-walled rib-web parts milling