Abstract:Residual stress in the machined surface can significantly influence the performance of machined parts. In recent years many researches have been carried out to measure and predict the machining-induced residual stress, where the machining-induced residual stress is often regarded as the function of machining parameters. Yet it is the combined effect of the thermal and mechanical loads that directly affect the stress field during cutting process. In this research, the cutting forces and cutting temperature were measured during end milling process with different feed rate and depth of cut, and the surface residual stress along peripheral direction was measured after machining. The effect of thermal and mechanical loads on the formation process of residual stress was analyzed, and a new prediction model was proposed, which specifies the effect of thermal and mechanical loads, and which also takes into consideration the influence of feed rate and the depth of cut. Generally the thermal loads drive the surface stress to be more tensile, while the mechanical loads have the opposite effect. Larger feed rate weakens the effect of cutting forces on unit area of machined surface remarkably, while the influence of the depth of but is less significant. Under the cutting conditions in this research, the surface residual stress along peripheral direction is tensile, which indicates that the thermal effect plays the dominant role in forming residual stress. The coefficients in the proposed model were determined with experimental data, and the model was preliminarily verified. It might be a useful method to achieve a real-time prediction and control of machining-induced residual stress by monitoring cutting forces and temperature.

A general model for prediction of deformation from initial residual stress

Finite Element Simulation and Analysis of Deformation in Machining of Aeronautical Aluminum Alloy Thin-Walled Workpiece

Analysis and Simulation of Machining Deformation Resulting from Residual Stress

A further study on representative models for calculating the residual stress based on the instrumented indentation technique

Finite Element Method Simulation for Residual Stress in Quenched Aluminum Alloy Thick-Plate and Its Effect on Machining Distortion

A semi-analytical model for predicting the machining deformation of thin-walled parts considering machining-induced and blank initial residual stress

Investigation on influences of initial residual stress on thin-walled part machining deformation based on a semi-analytical model

Prediction Model for the Evolution of Residual Stresses and Machining Deformation of Uneven Milling Plate Blanks

A Milling Deformation Model for Aluminum Alloy Frame-Shaped Workpieces Caused by Residual Stress

Quantitative Modeling and Decoupling Method for Assembly Deformation Analysis Considering Residual Stress from Manufacturing Process

A Data-Driven Method for Predicting Deformation of Machined Parts Using Sparse Monitored Deformation Data

Initial Residual Stress Measurement Based on Piecewise Calculation Methods for Predicting Machining Deformation of Aeronautical Monolithic Components

An Initial Residual Stress Inference Method by Incorporating Monitoring Data and Mechanism Model

Physics and data driven model for prediction of residual stresses in machining

Machining deformation prediction for frame components considering multifactor coupling effects

Prediction of stress distribution in press-fit process of interference fit with a new theoretical model

Prediction of Surface Residual Stress after End Milling Based on Cutting Force and Temperature

A New Regression Model for the Prediction of the Stress–Strain Relations of Different Materials

Analytical Modeling of Residual Stress in Laser Powder Bed Fusion Considering Part’s Boundary Condition

Analytical modeling of milling residual stress under different tool wear conditions

Residual stress prediction in ultrasonic vibration–assisted milling