Abstract:The Self-sensing Active Magnetic Bearings (SSAMBs) which feature for the simplification of independent displacement sensors, contribute to both cost reduction and convenience in control and assembly. The key point of this technique is to accurately estimate rotor position signals directly from coil voltages or currents, thus the actuator itself also serves as a virtual displacement sensor. Although several feasible approaches have been proposed to realize the self-sensing process, there still lie limitations in estimation accuracy, robustness and dynamic performance of the system. In fact, due to the nonlinear property of the self-sensing process, few accurate models are available for quantitative analysis of the estimation accuracy, and this restricts further development of this technique. Focusing on the modulation type SSAMBs, an accurate analytical model of the self-sensing in frequency domain is firstly established in this paper. Eddy current effects and filter properties are also considered for better accuracy. Based on this model, we evaluate possible estimation error sources during the self-sensing process, and investigate if the estimation accuracy can be improved fundamentally by selecting main system parameters properly. In this way, the estimation accuracy gets further improved under existing compensation methods, and better system robustness and dynamic performance can be achieved. Finally, the analytical model and associated conclusions are validated through static experiment, 4-Degree of Freedom (DOF) self-sensing rotor levitation experiment and 0-5000 rpm rotating operation experiment on a 4-DOF rigid rotor-radial SSAMBs platform. (C) 2016 Elsevier B.V. All rights reserved.

Bipolar-Voltage-Injection-Based Position Estimation Method of Planar Switched Reluctance Motors Using Improved Flux Linkage Model

Permanent Magnet Linear Synchronous Motor Mover Position Estimation at Zero and Low Speed Using Eddy Current Loss Equivalent Resistance

SWITCHED RELUCTANCE MOTOR SENSORLESS DRIVE WITH ENERGY OPTIMIZING CONTROL STRATEGY

A Novel Estimation Method of Sensorless Initial Rotor Position for Surface-mounted PMLSM

Online Sensorless Position Estimation for Switched Reluctance Motors Using One Current Sensor

Initial Position Estimation in Srm Using Bootstrap Circuit Without Predefined Inductance Parameters

An Improved Rotor Position Estimation Method for PMSM Using Low-Resolution Hall-Effect Sensors

An improved rotor position estimation in PMSM with low-resolution hall-effect sensors

Four-Quadrant Position Sensorless Operation of Switched Reluctance Machine for Electric Vehicles Over a Wide Speed Range

Nonlinear Flux Observer for Sensorless Control of IPMSM Based on a Novel Regression Model

A New Rotor Position Estimation Method for Spherical Reluctance Motor Based on Inductance Characteristics Obtained From Measurement

Fast Flux Linkage Measurement for Switched Reluctance Motors Excluding Rotor Clamping Devices and Position Sensors

Online Identification of Inductance and Flux Linkage for SPMSMs Decoupled from Resistance Voltage Drop and VSI Nonlinearity

Position Estimation Accuracy Improvement Based on Accurate Modeling of Self-Sensing Active Magnetic Bearings

An Improved Method to Estimate Initial Rotor Position for Surface-Mounted Permanent Magnet Synchronous Motors

Position Sensorless Control of Switched Reluctance Motors Using Reference and Virtual Flux Linkage With One-Phase Current Sensor in Medium and High Speed

Rotor Speed and Position Estimation Analysis of Interior PMSM Machines in Low and Medium-High Speed Regions Adopting an Improved Flux Observer for Electric Vehicle Applications

Indirect Position Control of High Speed Switched Reluctance Motor

Position Sensorless Control of Switched Reluctance Motor Drives Based on a New Sliding Mode Observer Using Fourier Flux Linkage Model

A Novel Rotor Position-Offset Injection-Based Online Parameter Estimation of Sensorless Controlled Surface-mounted PMSMs

Sensorless Mover Position Estimation of Permanent Magnet Linear Synchronous Motor