Abstract:The significant characteristics of the nickel-based Inconel 718 (IN718) superalloy are high strength, fatigue capacity, rupture strength, corrosion resistance, and creep resistance at temperatures exceeding 650 °C, which opens the application of IN718 for aircraft parts. The mechanical properties and surface residual stress (SRS) of the IN718 superalloy have been affected by fabrication and post-processing procedures, which shorten the service life of components. For the fabrication of complex aviation components, additive manufacturing of aerospace materials like IN718 has opened up new production techniques. However, localized melting and solidification produce anisotropy microstructure and a crystallographic texture with substantial tensile residual stress. These are responsible for mechanical anisotropy and pose metrological challenges for diffraction-based SRS detection. Knowing the magnitude and nature of SRS is crucial since they affect a mechanical properties and life of the parts. In this study, IN718 alloys were fabricated using the laser-based powder bed fusion (L-PBF) technique, and the impact of the standard ageing heat treatment (SAHT) process was assessed. The as-fabricated (AF) IN718 microstructure was found to have columnar dendritic structure and Laves phases in the interdendritic regions along the build direction. The SAHT sample microstructure led to the homogeneous precipitation of γ ′ and γ ′′ strengthening phases with δ and brittle Laves phases in grain boundaries. The average grain size of 41.56 μm in AF samples was increased to 44.80 μm after SAHT. The reduction of dislocation movements resulted in converting low angle grain boundaries found in the AF sample to high angle grain boundaries. SAHT samples displayed cubical texture along the and directions in the (001) plane. Following SAHT, there were increases in yield and ultimate tensile strength of 26.44% and 44.74%, respectively. On the other hand, the degree of elongation decreased to 36.19%. TRS in AF samples was converted into compressive surface residual stress following SAHT due to the phase transition. The process–structure–property relationship and the impacts of SAHT on the mechanical characteristics of the IN718 produced by L-PBF have been improved upon through this study.

Dynamic Strain Aging and Embrittlement Behavior of IN718 During High-Temperature Deformation

Temperature-dependent Deformation Mechanisms and Microstructural Degradation of a Polycrystalline Nickel-Based Superalloy

In-situ SEM study of temperature-dependent tensile behavior of Inconel 718 superalloy

Temperature dependence of deformation behavior, microstructure evolution and fracture mechanism of Inconel 625 superalloy

Strain localization in the Alloy 718 Ni-based superalloy: From room temperature to 650 °C

A piecewise constitutive model, microstructure and fracture mechanism of a nickel-based superalloy 750H during high-temperature tensile deformation

Very-High-Cycle-Fatigue Property of IN 718 Manufactured by Selective Laser Melting at Elevated Temperature: Microstructure-Related Failure Behavior and Life Prediction

Investigations on microstructure, crystallographic texture evolution, residual stress and mechanical properties of additive manufactured nickel-based superalloy for aerospace applications: role of industrial ageing heat treatment

Investigation of Microstructural Evolution and Mechanical Properties for In-Service Nickel-Based Superalloy

Microstructure and mechanical properties at elevated temperatures of as-built and heat-treated Inconel 718 produced through laser powder bed fusion processes

High Temperature Tensile Behavior of a Nickel-Based Superalloy 55Ni-17Cr-12Fe-9Mo-2Nb-1.5Al Used in Launch Vehicle Applications

Dynamic recrystallisation in Inconel®718 at creep conditions

In situ TEM Characterization of Microstructure Evolution and Mechanical Behavior of the 3D-Printed Inconel 718 Exposed to High Temperature

Microstructural evolution and mechanical properties of IN718 alloy fabricated by selective laser melting following different heat treatments

A comparative tribological study on as-cast and heat-treated Inconel-718 superalloy at elevated temperature

High‐Temperature Deformation Behavior and Microstructural Evolution of N06625 Nickel‐Based Alloy

Microcrack Nucleation and Propagation Investigation of Inconel 740H Alloy under in Situ High Temperature Tensile Test

Investigation of the fatigue damage mechanism of Inconel 617 at elevated temperatures obtained by in situ SEM fatigue tests

Investigation on the Microstructure and Tensile Behavior of a Ni-based IN792 Superalloy

Microstructure Evolution and Mechanical Properties of Inconel 740H During Aging at 750 °C

Oxidation behavior of Alloy 718 at a high temperature