Abstract:The lack of comprehensive insight and accurate description on the dynamic thermomechanical behaviors in high-temperature and high-strain-rate loading environment could be one of the major obstacles to extend the laser metal deposited (LMD) Inconel 718 to engineering applications in aeroengine. In this study, to obtain in-depth understanding of plastic flow behavior of the LMD Inconel 718, uniaxial compressive experiments were conducted over a wide range of temperature (298-1273 K) and strain rate (0.001-5300/s). Based on a great number of experimental results, not only the anisotropy of compressive property, but the dependence of the plastic flow stress on temperature and strain rate were investigated systematically. The flow stress of the as deposited alloy in laser scanning direction is higher than that in depositing direction, which is attributed to the columnar grains epitaxially growing along the build direction and featuring the high length-diameter ratio within the as-deposited sample. Since the small-size precipitates in the under-aged (as-deposited) Inconel 718 alloy could be cut by the moving dislocations directly during plastic deformation, they have various effect on the interaction between moving dislocations and interstitial elements at different strain rate. The third-type of strain aging (3rd SA) effect, exhibiting an anomalous bell-shaped flow stress vs. temperature relation, was observed more apparently than that in the post-aged Inconel 718 reported by other literatures. As for the strain-rate effect, the flow stress of the alloy exhibits inconspicuous strain-rate sensitivity over the range of strain rate below similar to 10(3)/s, while increases sharply with the strain rate once it exceeds similar to 10(3)/s. Finally, taking into account the mechanical anisotropy, as well as the anomalous temperature and strain rate sensitivities of the flow stress, we developed a constitutive model based on a physical frame. In this model, an anisotropy component was introduced to consider the effective size of columnar grains in the corresponding loading direction, the strain rate hardening was enhanced as the strain rate gets close to a certain level, and a normal distribution with temperature was used to describe the 3rd SA effect. The developed model was shown to be able to accurately reproduce the plastic flow behavior of the LMD Inconel 718 over a wide range of temperature and strain rate.

Deformation mechanisms of Inconel-718 at nanoscale by molecular dynamics

Research on microplastic deformation of Inconel718 under the conditions of high temperature and high strain rate

Effect of Grain Size on Deformation and Fracture of Inconel718: an In-Situ SEM-EBSD-DIC Investigation

Dislocation distribution, crystallographic texture evolution and plastic inhomogeneity of Inconel 718 fabricated by laser powder-bed fusion

Atomistic study on cooling rate induced nanoindentation properties of Additively Manufactured Inconel-718

A Molecular Dynamics Study on the Dislocation-Precipitate Interaction in a Nickel Based Superalloy During the Tensile Deformation

Wear mechanism, subsurface structure and nanomechanical properties of additive manufactured Inconel nickel (IN718) alloy

In-situ SEM study of temperature-dependent tensile behavior of Inconel 718 superalloy

Thermodynamic Behavior and Microstructure Evolution of Inconel 718 Alloy by Laser Metal Deposition

Thermomechanical Behavior of Laser Metal Deposited Inconel 718 Superalloy over a Wide Range of Temperature and Strain Rate: Testing and Constitutive Modeling

Temperature-dependent Deformation Mechanisms and Microstructural Degradation of a Polycrystalline Nickel-Based Superalloy

Mechanical Characterization of Near-Isotropic Inconel 718 Fabricated by Laser Powder-Bed Fusion

Anisotropic damage evolution and modeling for a nickel-based superalloy built by additive manufacturing

Selective Anisotropy of Mechanical Properties in Inconel718 Alloy

" variant-sensitive deformation behaviour of Inconel 718 superalloy

Interfacial dislocation evolution and yield mechanism of nickel-based single crystal superalloy: A molecular dynamics research

The Influence of Σ3 Grain Boundary and Δ Phase Competition Mechanisms on Size Dependence and Micro-Deformation Behavior of Inconel 718 Foil

Crystal Plasticity Modeling and Analysis for the Transition from Intergranular to Transgranular Failure in Nickel-based Alloy Inconel 740H at Elevated Temperature

Role of defects and microstructure on the fatigue durability of Inconel 718 obtained by additive layer manufacturing route

A comparison of dislocation cellular patterns generated in Inconel 718 alloy and pure Ni fabricated by laser powder bed fusion

Thermomechanical process modelling and simulation for additive manufacturing of nanoparticle dispersed Inconel 718 alloys