Abstract:One of the most common strategy to protect metallic substrates from corrosion is the use of organic coatings. The accurate prediction of long-term performances of this protective system is a very important issue for the coating industry. Outdoor exposure of organic coatings can produce the loss of their aesthetic and anticorrosion properties because of weathering conditions: sunlight, temperature, water, oxygen and pollutants. Coating service life is generally evaluated by using laboratory tests simulating in accelerated way the natural conditions (temperature, UV radiation, moisture, condensation, pollution). It is well known that it is difficult to find a clear correlation between natural exposure and artificial weathering. The time of exposure in a natural site is not sufficient to define the weathering conditions; it is important to consider different environmental parameters affecting the organic coating properties (energy from UV radiation, wet time, temperature). In this work the change of aesthetic and protective properties of organic coatings was investigated. Different systems were studied: epoxy-polyester and polyester coatings crosslinked with different hardeners. The coatings have distinct surface finishes and colours with particular aesthetic effects. The samples were exposed in Trento area (alpine region, north of Italy), monitoring all meteorological parameters. The same samples were artificially weathered by a cyclic test consisting of 72 h of UV exposure (ASTM G154 UVA, 340 nm) and 72 h of salt spray chamber exposure (ASTM B117, 5% NaCl, 35°C, 100% relative humidity). The aesthetic degradation was evaluated by gloss and colour variation measurements; the surface chemical changes were studied by FTIR analysis. Environmental scanning electron microscopy was used to obtain some information about morphological characteristics of the exposed surfaces. The degradation of protective properties was studied by electrochemical impedance spectroscopy. Different results have been obtained for aesthetic and protective properties. Concerning gloss and colour variations, a good relationship was found between artificial and natural tests. When considering the protective properties, laboratory test results were more aggressive due to the salt spray environment in which the samples have been exposed.

Weath ering Performance of Beech Wood Coated with Acrylic Paint Containing UV Stabilizers of Dihydroxy Benzophenone and Nano Zinc Oxide

Influence of nanoparticles and olive leaf extract in polyacrylate coating on the weathering performance of thermally modified wood

Effect of Acetylacetone Metal Salts on Curing Mechanism and Thermal Stability of Polybenzoxazine

Weathering performance of thermally modified wood coated with polyacrylate containing olive leaf extract as a bio-based additive

The Effect of Polyacrylate Emulsion Coating with Unmodified and Modified Nano-TiO2 on Weathering Resistance of Untreated and Heat-Treated Wood

Hygro-mechanical short-term behaviour of selected coatings: experiments and material modelling on vapour permeability and mechanical properties

The Effect of ZnO Nanoparticles on Weathering Performance of Wood Plastic Composites

The Synergistic Effects of Sio2 Nanoparticles and Organic Photostabilizers for Enhanced Weathering Resistance of Acrylic Polyurethane Coating

Improved weathering performance and wettability of wood protected by CeO2 coating deposited onto the surface

Caffeine and TiO2 Nanoparticles Treatment of Spruce and Beech Wood for Increasing Transparent Coating Resistance against UV-Radiation and Mould Attacks

The Weathering of the Beech and Spruce Wood Impregnated with Pigmented Linseed Oil

Improving the Technical Characteristics of Untreated and Heat-Treated Ayous Wood against Accelerating Ageing by Testing Two Application Modalities of an Innovative Polyurethane Coating for Outdoor Uses

Preserving Anti-Corrosion Properties of Epoxy Based Coatings Simultaneously Exposed to Humidity and UV-Radiation Using Nano Zinc Oxide

Surface Characteristics and Artificial Weathering Resistance of Oil-Based Coatings on the Chemically and Thermally Modified Short-Rotation Teak Wood

Reactive UV-absorber and epoxy functionalized soybean oil for enhanced UV-protection of clear coated wood

Improvement of weathering and thermal resistance of wood-plastic composites with iron oxide nanoparticles

Influence of natural and artificial weathering on aesthetic and protective properties of organic coatings

The Effect of Antibacterial and Waterproof Coating Prepared From Hexadecyltrimethoxysilane and Nano-Titanium Dioxide on Wood Properties

Effect of antiaging agents on the outdoor natural weathering of bamboo powder/polypropylene foamed composites

CNCs and CeO2 as organic-inorganic additives to enhance HPC bio-polymer wood coatings against photochemical degradation

Novel two-step strategy for the construction of weathering-resistant hydrophobic wood to extend its service life