CNCs and CeO2 as organic-inorganic additives to enhance HPC bio-polymer wood coatings against photochemical degradation

Monireh Moradienayat,Danial Harandi ,Zarah Walsh-Korb

DOI: https://doi.org/10.26434/chemrxiv-2023-c7xgw

2023-12-20

Abstract:Wooden objects of cultural heritage are susceptible to photochemical deterioration when exposed to UV radiation in outdoor environments, which results in the loss of their beauty and historical value. There is increasing interest in the field of wood conservation in studying biopolymers and bio-nanocomposite materials that have better characteristics and more compatibility with the wood components, thus, are more likely to give positive long-term conservation outcomes. This article focuses on the preparation of organic-inorganic bio-nanocomposite thin film coatings from hydroxypropyl cellulose (HPC), nanocrystalline cellulose (CNCs), and cerium nanoparticles (CeO2) applied using solution blow spraying (SBSp) to protect wood surfaces outdoors. The uniform coating of nanocomposites and the thin film formation of this novel bio-nanocomposite on the wood surface were characterized by SEM imaging. The FTIR spectra of the films show that not only do CNCs improve the stability of HPC against UV radiation, but adding CeO2 nanoparticles further optimized the UV resistance of the bio-nanocomposites. ATR analysis of treated wood surfaces shows a decrease in the formation of hydroxyl groups due to photo-oxidation for both HPC/CNC treatments and the organic-inorganic bio-nanocomposite HPC/CNCs/CeO2 NPs. These results were also verified by colorimetric analysis. The UV-Vis spectra of the bio-nanocomposites showed that they absorb primarily in the UV-A and UV-B regions. Furthermore, the band gap was narrowed by adding CeO2 NPs to the HPC matrix, leading to enhanced UV resistance thin films.

Chemistry

What problem does this paper attempt to address?

The paper primarily explores the use of nanocrystalline cellulose (CNCs) and cerium oxide nanoparticles (CeO2 NPs) as organic-inorganic additives to enhance the resistance of hydroxypropyl cellulose (HPC) biopolymer wood coatings against photochemical degradation. Specifically, the study addresses the issue through the following points:

1. **Background and Challenges**: Wooden cultural heritage is susceptible to ultraviolet (UV) radiation in outdoor environments, leading to the loss of its aesthetic and historical value. Current methods for wood protection, such as heat treatment and chemical modification, are often irreversible and may damage the fragile components of the wood.

2. **Solution**: A novel organic-inorganic bio-nanocomposite film coating based on HPC, CNCs, and CeO2 NPs is proposed, applied to the wood surface using the solution blow spinning (SBSp) method. This coating aims to improve the UV protection performance of the wood while maintaining its natural characteristics.

3. **Experimental Design**: Different compositions of HPC bio-nanocomposite films were prepared in the experiment, and their structure, chemical properties, and optical properties were characterized using scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), and UV-visible spectroscopy (UV-Vis).

4. **Results Analysis**:
- Adding CNCs can improve the UV stability of HPC, while the inclusion of CeO2 NPs further optimizes the UV protection performance of the bio-nanocomposite.
- FTIR analysis showed a reduction in hydroxyl groups on the treated wood surface, indicating that the coating effectively reduced photo-oxidation.
- UV-Vis spectroscopy revealed that the bio-nanocomposite primarily absorbs light in the UV-A and UV-B regions, and the addition of CeO2 NPs narrows the bandgap of the HPC matrix, enhancing the UV protection effect.
- Color measurement results showed that samples with CNCs and CeO2 NPs exhibited minimal color change after UV exposure, demonstrating good protective effects.

In summary, this study aims to provide a new method for effectively protecting outdoor wood from UV damage by developing an HPC bio-nanocomposite containing CNCs and CeO2 NPs. This method not only enhances the durability of the wood but also preserves its natural properties.