Abstract:Evaluating the physical mechanisms that link hydraulic fracturing (HF) operations to induced earthquakes and the anticipated form of the resulting events is significant in informing subsurface fluid injection operations. Current understanding supports the overriding role of the effective stress magnitude in triggering earthquakes, while the impact of change rate of effective stress has not been systematically addressed. In this work, a modified critical stiffness was brought up to investigate the likelihood, impact, and mitigation of induced seismicity during and after hydraulic fracturing by developing a poroelastic model based on rate-and-state frictional law and linear stability analysis. In the new criterion, the change rate of effective stress was considered a key variable to explore the evolution of this criterion and hence the likelihood of instability slip of fault. A coupled fluid flow–deformation model was used to represent the entire hydraulic fracturing process in COMSOL Multiphysics. The possibility of triggering an earthquake throughout the entire hydraulic fracturing process, from fracturing to cessation, was investigated considering different fault locations, orientations, and positions along the fault. The competition between the effects of the magnitude and change rate of effective stress was notable at each fracturing stage. The effective stress magnitude is a significant controlling factor during fracturing events, with the change rate dominating when fracturing is suddenly started or stopped. Instability dominates when the magnitude of the effective stress increases (constant injection at each fracturing stage) and the change rate of effective stress decreases (the injection process is suddenly stopped). Fracturing with a high injection rate, a fault adjacent to the hydraulic fracturing location and the position of the junction between the reservoir and fault are important to reduce the Coulomb failure stress (CFS) and enhance the critical stiffness as the significant disturbance of stresses at these positions in the coupled process. Therefore, notable attention should be given to the injection rate during fracturing, fault position, and position along faults as important considerations to help reduce the potential for induced seismicity. Our model was verified and confirmed using the case of the Longmaxi Formation in the Sichuan Basin, China, in which the reported microseismic data were correlated with high critical stiffness values. This work supplies new thoughts of the seismic risk associated with HF engineering.

A review of the microseismic focal mechanism research

Microseismic moment-tensor inversion and sensitivity analysis in vertically transverse isotropic media

Hydraulic Fracturing Shear/Tensile/Compressive Crack Investigation Using Microseismic Data

Microseismic Analysis to Aid Gas Reservoir Characterization

Microseismic monitoring technology of hydraulic fracture and its applications

A review of laboratory studies and theoretical analysis for the interaction mode between induced hydraulic fractures and pre-existing fractures

Finely Description for Fractured Reservoir and Comprehensive Evaluation of Seismic

Focal Mechanism Determination and Stress Inversion for Induced Seismicity Related to Shale Gas Hydraulic Fracturing

Micro Mechanism Investigation of Hydraulic Fracturing Process Based a Fluid-Solid Coupling Discrete Element Model

Focal Mechanism Determination for Induced Seismicity Using the Neighbourhood Algorithm

An Inversion-Based Microseismic Simulator for Fracture Diagnostics

Propagation simulation and structural characterization of multiple hydraulic fractures in naturally fractured unconventional hydrocarbon reservoirs

Source mechanism determination for hydraulic fracturing induced seismicity using full-waveform matching

Microseismic Monitoring of Hydraulic Fracture Propagation and Seismic Risks in Shale Reservoir with a Steep Dip Angle

An investigation of data analysis method for hydraulic fracturing based on the water hammer effect

A Review of Hydraulic Fracturing Simulation

Surface Microseismic Monitoring of Hydraulic Fracturing of a Shale-Gas Reservoir Using Short-Period and Broadband Seismic Sensors

Advancements and Future Prospects in the Hydraulic Fracturing of Geothermal Reservoirs

Implications for fault reactivation and seismicity induced by hydraulic fracturing

Focal Mechanism Determination of Induced Microearthquakes in an Oil Field Using Full Waveforms from Shallow and Deep Seismic Networks

Mechanisms of fracturing fluid spontaneous imbibition behavior in shale reservoir: A review