Abstract:Hydraulic fracturing is widely used to stimulate unconventional reservoirs, but a systematic and comprehensive investigation into the hydraulic fracturing process is insufficient. In this work, a discrete element-lattice Boltzmann method is implemented to simulate the hydro-mechanical behavior in a hydraulic fracturing process. Different influential factors, including treatment parameters (injection rates and fluid viscosity), formation parameters (in situ stress states and natural fractures) and rock properties (heterogeneity of rock strengths and rock permeability), are considered and their impacts on the initiation and propagation of hydraulic fractures are evaluated. A higher injection rate, increased viscosity, and larger in situ stress will lead to an increase in the initiation pressure. Conversely, higher formation permeability and a greater degree of heterogeneity in bond strengths will result in a decrease in the initiation pressure. The complexity of generated fractures is significantly influenced by the injection rate and degree of heterogeneity. However, fluid viscosity, in situ stress states, and formation permeability individually do not affect the geometrical complexity. Shear displacement can occur during a hydraulic fracturing process due to increased pore pressure and variations in in situ stress caused by injected fluid. Low-viscosity fluid with a high injection rate can have a significant pressure buildup and generate complex fracture networks in low-permeability heterogeneous formations. Natural fractures can significantly impact the complexity of generated fractures, while more in-depth research is required regarding complex natural fracture distributions. Hydraulic fracturing technique is essential for the development of unconventional reserves, such as shale gas/oil and geothermal reservoirs. To optimize field operations and properly estimate the stimulation reservoir volume, it is necessary to investigate the impact of influential factors. In this work, we adopt a numerical scheme (DEM-LBM) to investigate the process in detail and consider as many factors as possible, including treatment parameters (injection rates and fluid viscosity), formation parameters (in situ stress states and preexisting natural fractures), and rock properties (heterogeneity of rock strengths and rock permeability). The impacts of those influential factors on the initiation and propagation of hydraulic fractures are evaluated. We find that all factors have a significant impact on fracture initiation pressure. However, the complexity of generated fractures is mainly affected by injection rates and heterogeneity degrees of rock strengths. The combination of low-viscosity fluid and a high injection rate can result in the generation of a much more complex fracture network in a low-permeability heterogeneous formation. The existence of natural fractures can significantly influence the complexity of the generated fracture networks. Further research on natural fracture networks is feasible based on the foundation established in this work. Different influential factors have significant impacts on the initiation pressureExistence of natural fractures, high injection rates and heterogeneity degrees increase the geometrical complexity of fracturesLow-viscosity fluid combined with a high injection rate leads to a complex fracture network in low-permeability heterogeneous formation

A review of laboratory studies and theoretical analysis for the interaction mode between induced hydraulic fractures and pre-existing fractures

Study on the interaction between hydraulic fracture and natural fracture under high stress

Visualization of hydraulic fracture interacting with pre-existing fracture

Research on the impact of pre‐existing geological fractures on hydraulic fracturing in high in situ stress environments

Investigating the interaction of hydraulic fracture with pre-existing joints based on lattice spring modeling

Numerical Analysis on the Formation of Fracture Network during the Hydraulic Fracturing of Shale with Pre-Existing Fractures

Numerical Analysis for Dynamic Propagation and Intersection of Hydraulic Fractures and Pre-existing Natural Fractures Involving the Sensitivity Factors: Orientation, Spacing, Length, and Persistence

Interaction between hydraulic fractures and natural fractures: current status and prospective directions

Numerical Simulation of Influencing Factors of Hydraulic Fracture Network Development in Reservoirs with Pre-Existing Fractures

Study on Interaction Between Induced and Natural Fractures by Extended Finite Element Method

Investigation of coupled hydro-mechanical modelling of hydraulic fracture propagation and interaction with natural fractures

Propagation simulation and structural characterization of multiple hydraulic fractures in naturally fractured unconventional hydrocarbon reservoirs

Formation mechanisms of hydraulic fracture network based on fracture interaction

Study on the Interaction Mechanism of Hydraulic Fracture and Natural Fracture in Shale Formation

Numerical Investigation of Influential Factors in Hydraulic Fracturing Processes Using Coupled Discrete Element-Lattice Boltzmann Method

A New Approach to the Modeling of Hydraulic-Fracturing Treatments in Naturally Fractured Reservoirs

Interaction of a hydraulic fracture with parallel pre-existing fractures

The Analysis of Hydraulic Fracture Morphology and Connectivity under the Effect of Well Interference and Natural Fracture in Shale Reservoirs

Numerical and experimental investigation of the interaction of natural and propagated hydraulic fracture

Comprehensive Investigation of Factors Affecting Acid Fracture Propagation with Natural Fracture