Abstract:Hydraulic fracturing is widely used to stimulate unconventional reservoirs, but a systematic and comprehensive investigation into the hydraulic fracturing process is insufficient. In this work, a discrete element-lattice Boltzmann method is implemented to simulate the hydro-mechanical behavior in a hydraulic fracturing process. Different influential factors, including treatment parameters (injection rates and fluid viscosity), formation parameters (in situ stress states and natural fractures) and rock properties (heterogeneity of rock strengths and rock permeability), are considered and their impacts on the initiation and propagation of hydraulic fractures are evaluated. A higher injection rate, increased viscosity, and larger in situ stress will lead to an increase in the initiation pressure. Conversely, higher formation permeability and a greater degree of heterogeneity in bond strengths will result in a decrease in the initiation pressure. The complexity of generated fractures is significantly influenced by the injection rate and degree of heterogeneity. However, fluid viscosity, in situ stress states, and formation permeability individually do not affect the geometrical complexity. Shear displacement can occur during a hydraulic fracturing process due to increased pore pressure and variations in in situ stress caused by injected fluid. Low-viscosity fluid with a high injection rate can have a significant pressure buildup and generate complex fracture networks in low-permeability heterogeneous formations. Natural fractures can significantly impact the complexity of generated fractures, while more in-depth research is required regarding complex natural fracture distributions. Hydraulic fracturing technique is essential for the development of unconventional reserves, such as shale gas/oil and geothermal reservoirs. To optimize field operations and properly estimate the stimulation reservoir volume, it is necessary to investigate the impact of influential factors. In this work, we adopt a numerical scheme (DEM-LBM) to investigate the process in detail and consider as many factors as possible, including treatment parameters (injection rates and fluid viscosity), formation parameters (in situ stress states and preexisting natural fractures), and rock properties (heterogeneity of rock strengths and rock permeability). The impacts of those influential factors on the initiation and propagation of hydraulic fractures are evaluated. We find that all factors have a significant impact on fracture initiation pressure. However, the complexity of generated fractures is mainly affected by injection rates and heterogeneity degrees of rock strengths. The combination of low-viscosity fluid and a high injection rate can result in the generation of a much more complex fracture network in a low-permeability heterogeneous formation. The existence of natural fractures can significantly influence the complexity of the generated fracture networks. Further research on natural fracture networks is feasible based on the foundation established in this work. Different influential factors have significant impacts on the initiation pressureExistence of natural fractures, high injection rates and heterogeneity degrees increase the geometrical complexity of fracturesLow-viscosity fluid combined with a high injection rate leads to a complex fracture network in low-permeability heterogeneous formation

Micro Mechanism Investigation of Hydraulic Fracturing Process Based a Fluid-Solid Coupling Discrete Element Model

Numerical study of hydraulic fracturing on single-hole shale under fluid–solid coupling

Coupled Hydro-Mechanical XFEM Analysis for Multi-Fracturing Through an Excavation Driven by an Underlying Aquifer: a Forensic Case Study

Poromechanical Modeling and Numerical Simulation of Hydraulic Fracture Propagation.

Two-Dimensional Meso-Scale Simulation of Hydraulic Fracture in Concrete

Numerical Simulation of Hydraulic Fracturing Based on Discrete Element Method

A Micro-Macro Mechanism of Hydraulic Fracturing with Initial Stress State Effect of Brittle Rock

Modeling Interactions between Hydraulic and Closed Natural Fractures in Brittle Crystalline Rocks: A Fluid–Solid Coupling Grain-Based Approach for Characterizing Microcracking Behaviors

Analytical Model of Hydraulic Fracturing for Low Permeability Hot Dry Rock Reservoirs and DEM Simulation Base on Fluid-Solid Coupling

Pore-scale modeling of hydromechanical coupled mechanics in hydrofracturing process: Mechanics in Hydrofracturing

Research on Fluid–Solid Coupling Mechanism around Openhole Wellbore under Transient Seepage Conditions

Numerical Investigation of Influential Factors in Hydraulic Fracturing Processes Using Coupled Discrete Element-Lattice Boltzmann Method

Modeling Injection-Induced Fracture Propagation in Crystalline Rocks by a Fluid–Solid Coupling Grain-Based Model

Numerical Simulation of Hydraulic Fracture Propagation in Unconsolidated Sandstone Reservoirs

Fluid-solid-phase multi-field coupling modeling method for hydraulic fracture of saturated brittle porous materials

Simulation-Based Unitary Fracking Condition and Multiscale Self-Consistent Fracture Network Formation in Shale

Hydraulic Fracturing Mechanism of Rock Mass under Stress-Damage-Seepage Coupling Effect

Investigation of coupled hydro-mechanical modelling of hydraulic fracture propagation and interaction with natural fractures

Study on the Interaction Mechanism of Hydraulic Fracture and Natural Fracture in Shale Formation

Investigating Hydraulic Fracturing Complexity in Naturally Fractured Rock Masses Using Fully Coupled Multiscale Numerical Modeling

A Hybrid Finite Volume and Extended Finite Element Method for Hydraulic Fracturing with Cohesive Crack Propagation in Quasi-Brittle Materials