Coupled Hydro-Mechanical XFEM Analysis for Multi-Fracturing Through an Excavation Driven by an Underlying Aquifer: a Forensic Case Study

Yi Hong,Jianfeng Zhang,Yucheng Zhao,Lizhong Wang,Lilin Wang

DOI: https://doi.org/10.1007/s11440-023-02132-8

2024-01-01

Acta Geotechnica

Abstract:This paper presents a forensic numerical study on hydro-fracturing at three locations within an excavation in a clayey till underlain by an aquifer in Ontario, Canada. The pioneering forensic studies were based on continuum mechanics using finite element method (FEM) combined with an effective medium approach, which did not explicitly simulate the physical process of fracture propagation. This has overestimated the size of the venting holes (i.e., model aperture approximately 8 m, observed approximately 0.1 m), hindering accurate assessment of the venting locations at the excavation base. For this reason, a coupled hydro-mechanical XFEM analysis, which explicitly models fracture propagation, was performed in this study to revisit the case history from the perspective of fracture mechanics. Parametric study is also performed to investigate the influence of flow rate on the direction of the fracture propagation, and thus location of venting holes. It is shown that the coupled hydro-mechanical XFEM analysis offers better predictions than previous FEM analysis for both, locations and sizes of the three observed venting holes. The parametric study reveals that an increase in the flow rate from 5 to 10 L/min (which is within the reported range) leads to a wider and less curved fracture, altering the predictions of the venting locations at the excavation base by around 8 m. This is because an increasing flow rate causes wider aperture and higher shear stress near the fracture tip, which intensifies the re-orientation of maximum principle stress that facilitates the re-direction of the propagating fractures.