Abstract:SS316L steel is known as a marine-grade material, which is frequently used in shipbuilding structures and marine industries. In the present study, a shielded metal arc welding (SMAW) process was used for welding of SS316L steel plate by using electrode E316L-16 and E308L-16, welding currents of 70, 80 and 90 A and constant voltages of 24 V. The effect of process parameters on the microstructure and mechanical properties of the welded specimens in the fusion zone (FZ), heat-affected zone (HAZ) and at base has been analysed using scanning electron microscopy (SEM) and microhardness test. The results show that the mechanical properties of the SMAW welded sample are influenced by both electrode properties and applied current. The fusion zone hardness increases compared to the base material. The welded sample processed by using electrode E316L-16 and 80 A current exhibits the higher hardness i.e., 223 HV due to a combination of lower heat input, higher welding speed, and the presence of a fine grain structure compared to other welded sample. A tensile result shows that the Ultimate tensile strength (UTS) of the SMAW welded sample varies from 190 to 262 N/mm2 compared to a base material, i.e., 565 N/mm2. This drop in tensile strength in the welded joints is attributed to HAZ softening stemming from the formation of coarse-grained microstructures. Furthermore, thermal analysis utilizing ANSYS software was employed to assess the influence of heat input at different welding arc times and to map temperature distribution across various plate regions. The results indicate that reducing welding time leads to lower temperatures in the electrode samples, consistent with simulation outcomes. Additionally, variations in microstructure were evident across distinct plate regions. The impact of heat input on microstructural behaviour was further comprehensively examined.

Effect of process parameters on bead geometry, tensile and microstructural properties of double-sided butt submerged arc welding of SS 304 austenitic stainless steel

Process Parameter Optimization and Metallurgical Characterization in Double Pulse MIG Welding of SS 304 H

Impact of process parameters of resistance spot welding on mechanical properties and micro hardness of stainless steel 304 weldments

AISI 2205 DSS for body-in-white automotive structure: effect of welding current and time on the performance of spot welded joint

Effect and Optimization of Welding Parameters and Flux Baking on Weld Bead Properties and Tensile Strength in Submerged Arc Welding of HSLA 100 Steel

Effect of Ultrasonic Treatment on Residual Stress and Mechanical Properties of AISI 304 Stainless Steel Welding

A comparative study on weld-bead geometry of austenitic stainless-steel produced by cold metal transfer welding and pulse metal inert gas welding process

Effect of Welding Parameters of Resistance Spot Welding on Mechanical Properties and Corrosion Resistance of 316L

Effect of heat input on mechanical and metallurgical properties of AISI 304L stainless steel by using TIG welding

The Effect of Welding Current and Electrode Force on the Heat Input, Weld Diameter, and Physical and Mechanical Properties of SS316L/Ti6Al4V Dissimilar Resistance Spot Welding with Aluminum Interlayer

Effect of Microstructure Tailoring on the Deformation Coordination of Welded Duplex Stainless Steel

Experimental Investigation On The Microstructure And Mechanical Properties Of Dss2205 And Ss304L Dissimilar Weldments

Effect Of Solubilization Heat Treatment On Microstructure And Corrosion Resistance Of Joints Welded With The Autogenous Tig Process Duplex Stainless Steel

Effect of Process Conditions on Mechanical and Metallurgical Properties of Wire Arc Additively Manufactured 316L Stainless Steel

Influence of M-TIG and A-TIG Welding Process on Microstructure and Mechanical Behavior of 409 Ferritic Stainless Steel

Optimization of resistance spot welding process parameters and microstructural examination for dissimilar welding of AISI 316L austenitic stainless steel and 2205 duplex stainless steel

Investigation on microstructure evolution, mechanical properties and corrosion resistance of dual phase stainless steel joints welded by GTAW and SAW methods

Study and effect of GTAW parameters on mechanical properties of aluminium dissimilar welded joints: optimization technique

Parametric effect on microstructure evolution, grain size and mechanical behaviour of friction stir butt welding of AA6061-T6 alloy

Effect of Welding Heat Input and Post-weld Thermal Aging on the Sensitization and Pitting Corrosion Behavior of AISI 304L Stainless Steel Butt Welds

Microstructural, Mechanical, and Thermal Analysis of SS316L Weldment for Marine Engineering Application