Abstract:Friction stir welding (FSW) is a solid-state joining process used to weld dissimilar aluminum alloys with varying material properties and compositions. Unlike traditional welding methods, FSW does not involve melting the materials being welded but instead uses a rotating tool to heat and stir the materials until they are in a plastic state. The process results in a welded joint with high strength, excellent ductility, and minimal distortion, making it a popular choice in various industries, including aerospace, automotive, and marine. AA6061-T6 (Mg-Si) and AA7075 (Al-Zn-Mg-Cu) aluminum alloys are one of the most popular grades of aluminum alloys used in current manufacturing industries, such as aerospace and automotive, joined by the Friction Stir Welding Process (FSW) technique. Taguchi orthogonal array (L9) experimental design was applied to reduce the number of insignificant factors in the process. First, the study determines three welding factors: rotation speed, travel speed, and pin eccentricity. Investigations found that travel speeds significantly on tensile strength (Ts) and elongation ( %El), but the rotational speed and tool eccentricity did not affect Ts and %El. Furthermore, considering the fabricated parameters on the hardness (HV) of the joint, it was found that all factors unaffected the HV of the joint zone at a 95 % confidence level. Next, examine the microstructure; Mg2Al3 and Al2O3 intermetallic compounds were found in the weld. Therefore, investigating the crystallite size found that welding significantly affects the crystallite size. Finally, consider the fracture surface, experimental condition A2B1C2 (optimal parameter), which is the parameter with the highest tensile strength having dimple fracture characteristics. On the other hand, the welding condition A1B3C3, the parameter with the lowest tensile strength, Small and fine dimple fracture with cleavage fracture. Because the material is highly ductile and can undergo large deformations before it is damaged. On the other hand, materials with low tensile strength exhibiting cleavage fracture indicate that the materials are brittle and can break easily under stress

Study and effect of GTAW parameters on mechanical properties of aluminium dissimilar welded joints: optimization technique

Investigating parametric effects during TIG welding of dissimilar metals

Experimental Investigation and Parametric Optimization of the Tungsten Inert Gas Welding Process Parameters of Dissimilar Metals

Optimization of TIG welding process parameters using Taguchi technique for the joining of dissimilar metals of AA5083 and AA7075

Optimising the quality of several welds in a metal-inert gas arc joining of AA6082 and AA7075 using the grey-based Taguchi technique

Optimizing GMAW parameters to achieve high impact strength of the dissimilar weld joints using Taguchi approach

Weldability Investigation and Optimization of Process Variables for TIG-Welded Aluminium Alloy (AA 8006)

Optimization of process parameters of friction stir welded joints of dissimilar aluminum alloy by response surface methodology

Characterization and Optimization of TIG Welding Parameters for AISI 304 and AISI 316 Stainless Steel Dissimilar Joints

Effect of Current on Mechanical Properties and Microstructure of Aluminum 6061 with Gas Tungsten Arc Welding Process

Effect of CMT Welding Process Parameters on the Microstructural and Mechanical Properties of Dissimilar Aluminum Alloys of AA8011 and AA6061

Study on Optimization of Welding Process Parameters for A356 Cast Aluminum Alloy Based on Taguchi Method

Optimization of Process Parameters in Under Water Friction Stir Welded AA2014 and AA6082 joints.

Effect of welding parameters on microstructure, mechanical properties and environment

Study the effect process of parameters on friction welding of dissimilar metals AISI 304 steel and AA 2219 aluminium

Mathematical modeling and optimization of friction stir welding process parameters for armor-grade aluminium alloy

Comparative Analysis of Microstructure Evolution and Mechanical Properties of Dissimilar Welded Joints of AA7075/AA6061 via Friction Stir Welding, Tungsten Inert Gas Welding, and Tungsten Inert Gas + Friction Stir Processing

Development of mechanical property prediction model and optimization for dissimilar aluminum alloy joints with the friction stir welding (FSW) process

Surface enhancement on TIG welded dissimilar Al-Mg alloy with ER5356 and scandium composites filler rod

Effect of Gas Metal Arc and Cold Metal Transfer Arc Welding Processes on Microstructure and Mechanical Properties of AA8011-H18 Alloy Joints