Abstract:High temperature is an important factor affecting the mechanical properties and crack propagation behavior of granite. In this study, the mechanical properties and thermal damage mechanism of granite after high temperature are studied experimentally. Subsequently, based on the content and distribution of granite minerals, combined with computed tomography (CT) technique and grain-based model (GBM) modeling method, a novel discrete element numerical model considering real mineral distribution is introduced, and the rationality of the method is verified by experiments. On this basis, the mechanical behavior, crack propagation behavior and failure mode of granite after high temperature are studied. The results show that 450 °C is the thermal damage threshold of granite in this study. When T ≤ 450 °C, the development of thermally-induced microcracks is not significant, the P-wave velocity of granite decreases slightly, and the change of mechanical properties is not obvious. When T > 450 °C, the thermally-induced microcrack propagates rapidly, the fracture network and fracture zone are formed locally in the specimen, and the P-wave velocity and mechanical properties of granite deteriorate significantly. The simulation results show that the number of thermally-induced microcracks in granite specimens is positively correlated with temperature, and the tensile cracks are mainly at the mineral boundary, and the thermal stress concentration between mineral particles is the main cause of thermally-induced microcracks. After temperature treatment, there are mainly tensile cracks in granite specimens under uniaxial compression, and the orientation of tensile cracks tends to be isotropic with the increase of temperature. When T < 600 °C, the crack distribution and failure mode of granite specimens under uniaxial compression are consistent with those at room temperature. When T ≥ 600 °C, thermally-induced microcracks begin to dominate the uniaxial compression failure process, and granite specimens begin to show ductile failure characteristics, and the brittle-plastic transition was observed between 600 °C and 750 °C.

Effects of high temperature on rock bulk density

Effects of high temperature on the linear thermal expansion coefficient of Nanan granite

Tensile Microcracking Behavior of Granites after High Temperature Treatment by Considering the Effect of Grain Size and Mineralogical Composition

Laboratory Investigation on Physical and Mechanical Properties of Granite After Heating and Water-Cooling Treatment

Preparing rock samples using high temperature heating damage method and its application

Experimental investigation on mechanical behaviors of Nanan granite after thermal treatment under conventional triaxial compression

Physical-mechanical properties and thermal-induced damage of granite after high-temperature pretreatment

Mechanical Behaviors of Granite After Thermal Treatment Under Loading and Unloading Conditions

Experimental and numerical simulation study on the evolution of mechanical properties of granite after thermal treatment

Effect of high temperature on the brittleness index of granite: an experimental investigation

Damage evolution and acoustic emission characteristics of hard rock under high temperature thermal cycles

Mechanical behavior of granite subjected to thermal treatment: insight from experiment and numerical simulation

Experimental investigation on damage characteristics and fracture behaviors of granite after high temperature exposure under different strain rates

Temperature effect of rockburst in granite caverns: insights from reduced-scale model true-triaxial test

Thermal damage effect on the thermal conductivity inhomogeneity of granite

Effects of Thermal Treatment on the Macroscopic Physical Properties and Microstructure of Beishan Fine-Grained Granite

Experimental study of the influence of temperature and cooling method on dynamic mechanical properties and damage of granite

Mechanical Characteristics of Granite After Heating and Water-Cooling Cycles

Effects of temperature and increasing amplitude cyclic loading on the mechanical properties and energy characteristics of granite

Mechanical Properties and Crack Propagation Behavior of Granite After High Temperature Treatment Based on a Thermo-Mechanical Grain-Based Model

Investigation of the fracture characteristics of granite and green sandstone under different thermal treatments